1-2
SETTING THE PRINTER DRIVER
This section describes the method of changing the printer driver settings from your computer. If you have not yet
installed the printer driver, read the accompanying "SOFTWARE SETUP GUIDE (for printer)" and install the printer
driver from the CD-ROM.
Printer driver settings in Windows
(selecting and setting print conditions)
Change the settings using the printer properties.
■
■
■
■
Windows 95/98/Me
The procedure for adjusting the settings in
Windows Me is explained in the following.
1
On the [Start] menu, select [Settings] and
then [Printers].
2
Right-click the installed printer driver and
select [Properties] in the pop-up menu.
Click the [Setup] tab in the printer driver
properties.
The SHARP AR-M620N PCL6 properties is
shown as an example.
3
Set each item.
For setting items, see the printer driver help. For
information on viewing Help, see the following
. An example of always using the
document filing function is explained on
4
Click the [OK] button.
■
■
■
■
Windows NT4.0 / 2000 / XP
The procedure for adjusting the settings in
Windows XP is explained in the following.
1
Select [Printers and Faxes] from the [Start]
menu.
2
Right-click the installed printer driver and
select [Printing Preferences].
The screen shows the example of selecting
SHARP AR-M620N PCL6.
3
Set each item.
For setting items, see the printer driver help. For
information on viewing Help, see the following
. An example of always using the
document filing function is explained on
4
Click the [OK] button.
NOTE
To configure settings for installed peripheral devices such as a saddle stitch finisher, finisher, and large capacity
tray, right-click the printer driver, select [Properties], and select the [Configuration] tab. (In Windows 95/98/Me,
select [Properties] and then the [Configuration] tab in the [Setup] tab.) If the machine is being used as a network
printer, click the [Auto Configuration] button in the [Configuration] tab to automatically set the peripheral device
configuration. To display the latest tray information (paper size, paper type, and paper remaining), click the [Tray
Status] button in the [Paper] tab.
http://www.usersmanualguide.com/
