Sharp AR-5012, Руководство по обслуживанию

Страница: 59 / 108

AR-5012 SIMULATION, TROUBLE CODES 10 - 7
26 42 Transfer ON timing control setup
(Operation/Procedure)
1. When this simulation is executed, the currently set code number is displayed.
2. Enter the code number and press the START key, and the setting will be changed. (For any number different from the following
ones, the default time is automatically set.)
43 Side void setup
(Operation/Procedure)
1. When this simulation is executed, the currently set code number of the side void amount is displayed.
2. Enter the code number and press the start key. The setting is changed.
55 CRUM Destination Indication
When the simulation is executed, the CRUM destination currently set (saved) in the CRUM chip is displayed.
62 Energy-save mode copy lamp setup
Used to set half-ON (50%)/OFF of the copy lamp in the pre-heat mode.
When this simulation is executed, the current setup of the code number is displayed. Enter the code number and press the PRINT
switch to enable the setup.
63 Fan control select setup
Used to set the cooling fan operation mode.
When this simulation is executed, the current setup of the code number is displayed. Enter the code number and press the PRINT
switch to enable the setup.
Main
code Sub
code
Content
Code number Setting
0 Default (330 msec)
1 – 40 msec
2 – 30 msec
3 – 20 msec
4 – 10 msec
5 Default (330 msec)
6 +10 msec
7 +20 msec
8 +30 msec
9 +40 msec
Code number Setting
0 0 mm
1 0.5 mm
2 1.0 mm
3 1.5 mm
4 2.0 mm * Default
5 2.5 mm
6 3.0 mm
7 3.5 mm
8 4.0 mm
9 4.5 mm
10 5.0 mm
Code number Setup
00 No set
01 BTA-A
02 BTA-B
03 BTA-C
99 Conversion
Code number Setup
0 Copy lamp half-ON (50%) * Default
1 Copy lamp OFF
Code number Setup
1 1-speed fan control
2 2-speed fan control * Default when starting mass production