Sharp AR-280, Руководство по эксплуатации

Страница: 18 / 168

2-4
CHAPTER
2
1-sided copies of 1-sided originals
1
Adjust the original guides to the size of the originals and
set the originals face down (AR-280) or face up (AR-285/
AR-335) in the document feeder tray.
●
The original size will be indicated on the touch panel, and the
paper tray with the corresponding paper size will be automatically
selected.
● Be sure to remove any original from the document glass before
setting the originals in the document feeder tray. In the AR-285
and AR-335, if an original is left on the document glass, the
original reminder indicator will blink. Remove the original from
the document glass in this case.
●
If copy paper of the required size is not installed in any of the
trays, the following message will appear.
LOAD PAPER.
If a tray of the required size is not installed, use the bypass tray
and press the “PAPER SELECT” key on the touch panel to
select the bypass tray.
● To copy onto a different size paper, use the “PAPER SELECT”
key to make the selection.
2 Ensure that the 1-sided to 1-sided copying mode is
selected on the touch panel.
● When no icon is displayed in the area indicated in the illustration
(
), the 1-sided to 1-sided copying mode is selected.
● If the 1-sided to 1-sided mode is not selected, press the
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
) on the touch panel. Press the “OK” key to return to the
basic screen.
3
Use the 10-key pad to enter the desired number of
copies.
●
The number will be shown in the copy quantity display of the
touch panel.
●
Use the CLEAR (
C
) key to cancel an entry if a mistake has
been made.
●
If you set a multiple number of copies, the copies will be
delivered collated. To deliver in the GROUP mode, press the
OUTPUT key and then select “GROUP” on the touch panel. See
page 2-17.
4
Press the START ( ) key.
● To cancel a copy run, press the CLEAR ALL (
CA
) key. Copying
will stop and the SPF/RADF will output any originals which have
been fed. Also, the number in the copy quantity display will be
reset to 0.
MAKING COPIES
Using the SPF/RADF
USING THE SPF/RADF
READY TO COPY. (DOCUMENT FEEDER MODE)
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO A4
1. A4
2. A3
A4 ORIGINAL
1 2 3
4 5
6
7 8 9
0
C
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START