Sharp AR-250, Руководство по эксплуатации

Страница: 39 / 178

3-5
CHAPTER
3
SPECIAL FUNCTIONS
Margin shift
MARGIN SHIFT
3
Press the “MARGIN SHIFT” key on the touch panel.
● The setting screen for MARGIN SHIFT will appear.
●
If an optional duplex module (AR-DU1) is not installed, the
margin shift setting for the reverse side will not be displayed.
4
Select the shift direction.
●
Select “RIGHT”, “LEFT”, “DOWN” or “UP” on the touch panel.
The selected shift direction will be highlighted.
5
Select the desired shift amounts using the and
keys.
6
Press the upper “OK” key on the touch panel.
7
Make all other desired copier selections and press the
START (
) key.
● If the optional document feeder is used, scanning of originals and
copying will start.
●
If the document glass is used in the SORT mode, proceed to the
next step.
8
Replace the finished original with the next original after
the START (
) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
●
Copying will start at this time.
● To cancel the MARGIN SHIFT function, select the MARGIN
SHIFT function again and press the “CANCEL” key.
READY TO COPY.
MARGIN SHIFT
CANCEL
SIDE 1 SIDE 2
10 10
RIGHT LEFT
OK
OK
DOWN UP
(0~20)
mm (0~20)
mm
MARGIN SHIFT
CANCEL
SIDE 1
10
RIGHT LEFT
DOWN UP
(0~20)
mm
SIDE 1
10
RIGHT LEFT
DOWN UP
(0~20)
mm
SIDE 2
OK
OK
CA
CLEAR ALL
START
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT
MULTI SHOT
PAMPHLET COPY
ERASE
COVERS
IMAGE EDIT
TEXT STAMP
TRANSPARENCY
INSERTS
DUAL PAGE
COPY
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO A4
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO A4