Sharp AR-250, Руководство по эксплуатации

Страница: 29 / 178

2-15
CHAPTER
2
Two-sided copying with bypass tray
Two-sided copies can be made manually using the bypass tray. The
procedure described below is useful for users of the copier without an
optional duplex module (AR-DU1).
1
Place the first original face down on the document glass
and make a copy.
●
The first side of the copy can be made using any of the paper feed
stations.
2
Replace the first original with the second original and
close the document cover.
●
Make sure the first and second originals are oriented in the same
way on the document glass.
● The first and second originals can be set in the optional document
feeder tray. However, they must be set individually.
3
Turn the first copy over without changing its top-bottom
orientation and place it into the bypass tray.
● Be sure to feed the copies one sheet at a time.
4
Press the “PAPER SELECT” key and select the bypass
tray.
5
Press the START ( ) key.
SPECIAL PAPERS (manual feed)
MAKING COPIES
Special papers (manual feed)
1 2
1 2
3 4
3 4
1 2
CA
CLEAR ALL
START
R SELECT
100%
COPY RATIO
O A4
A4
A3
A4