Sharp AR-207 Скачать руководство пользователя

Страница: 25 / 84

MAKING COPIES

REDUCTION/ENLARGEMENT/ZOOM

Reduction and enlargement ratios can be selected either automatically with
the AUTO IMAGE key or manually with the PRESET RATIO selector (

) keys and/or the zoom (

) keys. The zoom function enables precise

copy ratio selection from 50% to 200% in 1% increments.

Reduction/enlargement/zoom

Automatic

Place the original in the document feeder tray or on the
original table.

●

The ORIGINAL SIZE indicator for the detected size will light up.

Use the TRAY SELECT key to select the paper tray with
the desired paper size.

●

This feature will not work when copy paper of non-standard size is
used or the bypass tray is used.

Press the AUTO IMAGE key.

●

The copy ratio will be automatically set.

●

If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.

●

If user program No.7 is not set and the orientation of
the original does not correspond to standard
reduction/enlargement ratios for the selected paper
tray, the ORIGINAL SIZE indicator will blink. Change
the orientation of the original.

Set the number of copies.

Press the START key.

●

To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE key again.

●

When copying from the RSPF with this feature, the
automatic reduction/enlargement mode will be
automatically canceled after copying is complete.

Содержание AR-207





















































































Результаты поиска

Содержание AR-207

Отзывы:

Похожие инструкции для AR-207

Бренды по названию

Популярные бренды

Sharp AR-207, Руководство по эксплуатации

Результаты поиска

Содержание AR-207

Отзывы:

Похожие инструкции для AR-207

Бренды по названию

Популярные бренды