background image

3

GETTING ST

AR

TED

Main features

As an 

E

NERGY 

S

TAR

®

 Partner, SHARP has determined that this product meets

the 

E

NERGY 

S

TAR

®

 guidelines for energy efficiency.

MAIN FEATURES

High-speed laser copying

First-copy time is only 7.2 seconds (except in a power save mode or immediately after power on).

Copying speed is 20 copies/min., which adapts to business use, allowing improvement of working efficiency.

High-quality digital image

High-quality copying at 600 dpi is performed.

In addition to the automatic exposure mode, the manual exposure can be adjusted in five steps.

The photo mode copying function allows clear copying of delicate halftone original images such as monochrome
photos and color photos. Photo mode is adjustable in five steps.

Substantial copying features such as:

Copies up to ledger size originals from the original table, or through the 30 sheet automatic document feeder

Continuous copying up to 99 sheets

Scan once/print many to increase reliability and productivity

8 pre-set reduction and enlargement ratios plus 50% - 200% zoom in 1% increments

Automatic two-sided copying can be performed.

Electronic sorting eliminates the need for a bulky, mechanical sorter

Dual page copy mode for books, magazines and manuals

Editing features like XY zoom and black/white reverse

Digital editing features like 2 IN 1/4 IN 1 copying

Optional features

This copier can be used as a laser printer by installing an optional printer expansion kit.

This copier can be used as a facsimile machine by installing an optional facsimile expansion kit.

Environmentally friendly design

Paper output tray is housed in the copier for space saving.

Preheat and auto power shut-off modes are provided to reduce power consumption in standby mode and meet the
Energy Star Guidelines.

The Environmental Choice Program guidelines are applied to the products only in
Canada. The products that meet the Environmental Choice Program guidelines carry
the logo shown to the left. The products without the logo may not meet the
Environmental Choice Program guidelines.

Содержание AR-207





















































































Отзывы: