Sharp AR-205, Руководство по эксплуатации

Страница: 43 / 92

41
GENERAL INFORMA
TION
USER PROGRAMS
4
Select the desired parameter using the numeric keys.
● The entered parameter number will blink on the right side of the copy
quantity display.
● The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.
5 Press the START ( ) key.
● The right-hand number in the copy quantity display will be steadily lit
and the entered value will be stored.
6
To continue with other user programs, press the key
and then repeat steps 2 to 5. To exit the user program
mode, press the light (
) key.
● All the alarm indicators will go out.
User programs
Program name Parameters
Auto clear time 0
e
OFF 1
e
30 sec. * 2
e
60 sec. 3
e
90 sec. 4
e
120 sec.
5
e
10 sec.
Preheat mode** 0
e
OFF ** 1
e
30 sec. 2
e
60 sec. * 3
e
90 sec. 4
e
120 sec.
Auto power shut-off timer * 1
e
30 min. 2
e
60 min. 3
e
90 min. 4
e
120 min. 5
e
240 min.
Stream feeding mode * 0
e
OFF 1
e
ON
Auto power shut-off setting 0
e
OFF * 1
e
ON
Border line for 2 in 1 or 4 in 1 * 0
e
OFF 1
e
ON
Rotation copy 0
e
OFF * 1
e
ON
Auto paper select mode 0
e
OFF * 1
e
ON
Auto tray switching 0
e
OFF * 1
e
ON
Erase width adjustment 0
e
0 mm 1
e
5 mm * 2
e
10 mm 3
e
15 mm 4
e
20 mm
( 0
e
0" 1
e
1/4" * 2
e
1/2" 3
e
3/4" 4
e
1")
Layout in 2 in 1 copy * 1
e
Pattern 1 2
e
Pattern 2
Layout in 4 in 1 copy * 1
e
Pattern 1 2
e
Pattern 2 3
e
Pattern 3 4
e
Pattern 4
Offset of paper output tray 0
e
Upper OFF, lower OFF * 1
e
Upper ON, lower ON
2
e
Upper ON, lower OFF 3
e
Upper OFF, lower ON
Image rotation in duplex * 0
e
OFF 1
e
ON
copying
Location of the margin * 1
e
Left 2
e
Top
Factory default settings are indicated with an asterisk (*). For layout in 2 in 1 copy and 4 in 1 copy, see page 69.
** In European countries, the default setting of the preheat mode is 1 (
e
30 sec.). For other programs, factory default settings
in these countries are same to those shown above with an asterisk (*).
If you select “0” (OFF) in a program, the corresponding
function will be disabled.