manualshive.com logo in svg

Sharp AR-205, Руководство по эксплуатации

Поделиться
Скачать
Sharp AR-205 Скачать руководство пользователя страница 22

20

MAKING COPIES

TWO-SIDED COPYING

Automatic two-sided copying can be made with this copier. For two-sided
copying from the original table, follow the procedure below. Fully automatic
two-sided copies can be made from one-sided originals if either an optional
single pass feeder (SPF) or an optional reversing single pass feeder (RSPF)
is installed. See page 60. Additionally, fully automatic two-sided copying of
two-sided originals or one-sided copying of two-sided originals can be made
if an optional reversing single pass feeder is installed. See page 62.

Two-sided copying

1

Place the first original face down on the original table
and close the platen cover.

2

Press the ORIGINAL TO COPY key to select one-sided to
two-sided (

) copying.

3

Ensure that the desired paper tray is selected.

●

Paper sizes that can be used in the duplex mode are A5, A4, A4R, B4
and A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", and
11" x 17").

●

5-1/2" x 8-1/2" size paper cannot be used in the duplex mode.

●

The bypass tray cannot be used in the duplex mode.

4

Press the START (

) key.

●

The 

 indicator will blink.

●

The copy will not be output until both sides have been scanned.

Содержание AR-205





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды