manualshive.com logo in svg

Sharp AR-205, Руководство по эксплуатации

Поделиться
Скачать
Sharp AR-205 Скачать руководство пользователя страница 13

11

GETTING ST

ARTED

Changing the copy paper size in the tray

1

Gently lift and pull out the paper tray until it stops.

2

Push the pressure plate down until it locks in place.

3

Squeeze the lock lever of the front guide and slide the
front guide to match the width of the paper.

4

Move the left guide to the appropriate slot as marked
on the tray.

●

When using A5 (5-1/2" x 8-1/2") copy paper, load it into the
uppermost paper tray. If other trays (including trays in optional paper
feed units) are used, paper misfeeds may occur.

●

With inch system machines, when using A3 (11" x 17") copy paper,
store the left guide in the slot at the left front of the paper tray.

5

Load copy paper into the tray.

6

Place the appropriate label to indicate the selected
paper size into the recess on the right front side of the
paper tray.

7

Push the paper tray firmly back into the copier.

 Loading copy paper

LOADING COPY PAPER

Front guide

Left guide

Содержание AR-205





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды