Sharp AR-164, Руководство по эксплуатации

Страница: 36 / 80

34
SPECIAL FEATURES
2 in 1 or 4 in 1
4
Enter the desired pattern number using a numeric key.
●
The entered number will blink in the copy quantity display. For layout
pattern numbers, see the previous page.
5
Press the START key.
●
The entered number will light up steadily.
6
Press the 2 IN 1 / 4 IN 1 key to complete the selection.
●
The copy ratio will be calculated automatically. If the calculated copy
ratio is less than 50%, part of original image may not be copied
because the smallest copy ratio is 50%.
7
Set the number of copies.
8
Press the START key.
●
Copying will start after the originals have been scanned. Up to 30
sheets of originals can be scanned. (If originals are fed continuously
using the stream feeding mode, up to approximately 60 sheets of 8-1/
2" x 11" originals can be scanned. However, when copying originals
which require more memory such as photographs, the number of
originals which can be scanned will be less.) When the memory
becomes full of scanned original image data, the ORIGINAL DATA
indicator will blink.
When the ORIGINAL DATA indicator blinks, the copier will stop
scanning. To start copying of scanned originals, press the START key.
To cancel copying, press the CLEAR or CLEAR ALL key.
2 IN 1 OR 4 IN 1