background image

2

Cautions on handling

Be careful in handling the unit as follows to maintain the performance of this unit. 

Do not drop the unit, subject it to shock or strike it against any object.

Store spare toner cartridges in a cool dry place without removing from the
package before use.

• If they are exposed to direct sunlight or excessive heat, poor copies may result.

Do not touch the photoconductive drum (green portion).

• Scratches or smudges on the drum will cause dirty copies.

Proper storage for supplies

Store the supplies (paper and toner cartridges) in a location that is:

• clean and dry
• at a stable temperature
• not exposed to direct sunlight

Store paper in the wrapper and lying flat.

• Paper stored out of the wrapper or in packages standing on end may curl or get 

damp, resulting in paper misfeeds.

Trademark acknowledgements

• Microsoft and Windows are trademarks of Microsoft Corporation in the U.S.A. and 

other countries.

• IBM and PC/AT are trademarks of International Business Machines Corporation.
• Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
• All other trademarks and copyrights are the property of their respective owners.

As an ENERGY STAR

®

 Partner, SHARP has determined that 

this product meets the ENERGY STAR

®

 guidelines for energy 

efficiency.

Safety precautions:

This Digital Copier is rated Class 1 and complies with 21 CFR 1040.10 and 
1040.11 of the CDRH standards. This means that the unit does not produce 
hazardous laser radiation. For your safety, observe the precautions below.
• Do not remove the cabinet, operation panel or any other covers.
• The unit’s exterior covers contain several safety interlock switches. Do not 

bypass any safety interlock by inserting wedges or other items into switch slots. 

A small amount of ozone is produced within the unit during operation. The 
emission level is insufficient to cause any health hazard.

Note:

The present recommended long term exposure limit for ozone is 0.1ppm 
(0.2m

g

/m

3

) calculated as an 8hr. time-weighted average concentration.

However, since the small amount that is emitted may have an objectionable odor,
it is advisable to place the unit in a ventilated area.

Содержание AR-153E N


























































































































Отзывы: