Sharp Aquos SH-02K, Инструкция по эксплуатации

Страница: 76 / 225

z
The registration process using WPS takes a few
minutes. After completion of the registration of the
access point, check that the proper connection to the
access point is acquired.
z
As for the manual registration of an access point, this
function supports WEP, WPA/WPA2 PSK and
802.1xEAP as the security setting.
z
If you connect to an access point which is not
connected to the Internet, [
] is displayed and the
communication may be made by mobile networks, not
Wi-Fi connection.
To make Wi-Fi communication by using such an
access point, disable [Avoid poor connections] of
Advanced options before connecting to the access
point.
„
Detailed settings
1
In the standby screen,
z
▶ [Settings] ▶
[Wi-Fi]
2
z
▶ [Advanced]
3
Select an item
„
Scanning always available : Set whether to use
Location Information or network scanning from apps
even when [Wi-Fi settings] is off.
„
Network notification : Set whether to display a
notification icon when an open network is detected.
y
Set it after setting [Wi-Fi settings] to On.
„
Wi-Fi sleep policy : Set whether to disconnect Wi-Fi
when the display is turned off.
„
Avoid poor connections : Set whether to use the
Wi-Fi function only when stable Internet
connections are available.
„
Handover : Set whether to use handover.
„
Install certificates : Install certificates.
„
Wi-Fi Direct : For details
☞
P. 75"Wi-Fi Direct"
„
MAC address : Confirm the MAC address.
„
IP address : Confirm the IP address.
74
Before Using the Handset