Sharp Aquos SH-02K, Инструкция по эксплуатации

Страница: 161 / 225

Infrared communication
„
Receiving data
1
In the standby screen,
z
▶ [Tools] ▶
[Infrared]
2
[Receive]
3
Perform sending operation on sender's
device
4
Face the infrared ports of the receiver's
and sender's devices ▶ [OK] ▶ [Save]
„
Receiving all data
1
In the standby screen,
z
▶ [Tools] ▶
[Infrared]
2
[Receive all]
3
Enter the authentication password ▶ [OK]
4
Perform sending operation on sender's
device
5
Face the infrared ports of the receiver's
and sender's devices ▶ [OK] ▶ [Save]
z
After the operation for receiving, the handset waits to
receive data. Infrared communication automatically
begins when data is sent from sender's device within
approximately 60 seconds.
z
Note that if you select [Save] when receiving all data,
all data registered to the target function are deleted.
z
Receiving all data may not be available depending on
the data type.
z
When available space in the save destination
becomes insufficient while receiving data, the data
being received to that point are saved and receiving
ends.
„
Selecting data and sending
Example: Still picture
1
In the standby screen,
z
▶ [Data]
2
Select a still picture
3
z
▶ [Send] ▶ [Infrared]
4
Perform receiving operation on receiver's
device
5
Face the infrared ports of the handset and
receiver's devices ▶ [OK]
159
Data communication