Sharp Aquos SH-02K, Инструкция по эксплуатации, Страница: 77 / 225

„
Wi-Fi Direct
Connect to other Wi-Fi Direct-capable devices with the
Wi-Fi function without an access point or the Internet.
z
Available when [Wi-Fi] is set to On (
☞
P. 73「Wi-Fi
settings」).
1
In the standby screen,
z
▶ [Settings] ▶
[Wi-Fi] ▶
z
▶ [Advanced] ▶ [Wi-Fi Direct]
z
Continue by following the instructions on the
screen and operate.
„
Disconnecting
1
In the standby screen,
z
▶ [Settings] ▶
[Wi-Fi]
2
Select the connected access point ▶
[Disconnect]
z
Disconnect with the password retained. The access
point may be automatically connected again such
as when the display is turned on.
Tethering
You can use the tethering function that connects Wi-Fi
compatible devices, or PCs etc. connected via USB
cable A to B 01 (sold separately) or Bluetooth
communication to the Internet by using the handset as
an access point.
z
You can connect up to 16 devices in total at the same
time: a PC connected via USB cable A to B 01, 10
Wi-Fi compatible devices and five Bluetooth devices.
z
Before using Bluetooth tethering, register the other
party's Bluetooth device in advance (
☞
P. 163"Using
Bluetooth function"). As for the settings on the
Bluetooth device, refer to its manual.
1
In the standby screen,
z
▶ [Settings] ▶
[Network] ▶ [Network settings] ▶
[Tethering]
2
Select an item
„
USB tethering : Set whether to use the USB
tethering.
„
Wi-Fi tethering : Set whether to use the Wi-Fi
tethering.
„
Set up Wi-Fi hotspot : Make settings for Wi-Fi
tethering such as network name and security.
„
Bluetooth tethering : Set whether to use the
Bluetooth tethering.
75
Before Using the Handset