Sharp aquos PN-L603B Скачать руководство пользователя страница 41

Страница: 41 / 66

■ To set from a PC

When the monitor is connected to a PC, LAN settings can be

configured via PC.

Set up process

(1) Connect your monitor to a PC

(2) Specify the PC’s IP address

(3) Configure the monitor’s LAN settings

(1) Connecting your monitor to a PC

Connect a commercially available crossover LAN cable

(UPT cable, Category 5) to the LAN port on the PC and this

monitor.

LAN cable

(commercially available, crossover)

To LAN terminal

LAN terminal

(2) Specifying the PC’s IP address

To configure the monitor’s LAN settings, you must temporarily

change the settings on the PC.

This explanation is based on Windows 7.

1. Log on to the PC with an administrator account.

2. Click [Start], and then click “Control Panel”.

3. Click “View network status and tasks” in “Network and

Internet”.

In “Classic View”, click “Network and Sharing Center”.

4. Click “Local Area Connection” and then “Properties”.

5. Click “Internet Protocol Version 4 (TCP/IPv4)” and then

“Properties”.

6. Make a note of the current IP address, subnet mask, and

default gateway settings.

Make sure you write this information now as you will

be changing the IP address, subnet mask, and default

gateway settings back to these settings afterwards.

7. Temporarily change the IP address and subnet mask.

To access the monitor as it is shipped from the factory, set

as follows.

• IP Address: 192.168.150.1

• Subnet Mask: 255.255.255.0

• Default Gateway: (leave blank)

8. Click [OK] and then reboot the PC.

TIPS

• This monitor is factory preset as shown below.

(When DHCP CLIENT is set to OFF)

IP Address

: 192.168.150.2

Subnet Mask

: 255.255.255.0

Default Gateway : 0.0.0.0

(3) Configuring the monitor’s LAN settings

Access the monitor using Internet Explorer.

Controlling the monitor

1. Turn the power ON to the monitor.

2. Set DHCP CLIENT to OFF in LAN SETUP on the SETUP

menu.

PC operation

3. Launch Internet Explorer, in the “Address” box type

“http://192.168.150.2/” and press the Enter key.

Controlling the Monitor with a PC (LAN)

Содержание aquos PN-L603B



































































Результаты поиска

Содержание aquos PN-L603B

Отзывы:

Похожие инструкции для aquos PN-L603B

Бренды по названию

Популярные бренды

Sharp aquos PN-L603B, Руководство по эксплуатации

Результаты поиска

Содержание aquos PN-L603B

Отзывы:

Похожие инструкции для aquos PN-L603B

Бренды по названию

Популярные бренды