96
Appendix
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
Press
a
/
b
to select “Reset”, and then press
?
.
3
Press
c
/
d
to select “Yes”, and then press
?
.
• “Now, TV will restart automatically. OK?” displays
on the screen.
5
Press
MENU
and the MENU screen displays.
1
Press
c
/
d
to select “Yes”, and then press
?
.
• “Now initialising...” displays on the screen and
blinks.
• After the reset has completed, the power shuts
off and then comes back on. The screen will have
returned to its original settings.
6
Reset
If you have already set the password, enter it
here.
• “Return to factory pre-settings” displays on the
screen.
4
Information
Press
a
/
b
to select the desired language
listed on the screen, and then press
?
.
Press
c
/
d
to select “HOME” or “STORE”,
and then press
?
.
7
8
Press
c
/
d
to select “Digital Search” or
“Analogue Search”, and then press
?
.
9
The TV searches for, sorts and stores all
the receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress, press
RETURN
.
NOTE
• When the TV is in “STORE” mode, repeat steps 1 to 7 to change to
“HOME” mode.
• “Reset” is greyed out in 3D mode. To select the “Reset” menu, you
need to switch to 2D mode.
Download setup
The TV automatically determines whether a new software
version is available when the TV is in standby mode.
Go to “Menu”
s
“Setup”
s
“View setting”
s
“Individual
setting”
s
“Standby search”
s
“Download setup”.
Selected item
Description
Yes
Automatically searches for new software
updates available when the TV is in
standby mode.
No
Does not search for update information.
Now
Checks if there is new software
immediately.
Downloading the software
You can select the method of update.
Selected item
Description
Yes
Starts downloading immediately.
Typically, it takes approximately 30
minutes for download. You cannot carry
out other operations while downloading.
• Cancels the download by pressing
?
on
the remote control unit when “Discontinue”
is displayed on the screen during the
update.
No
Starts downloading automatically several
minutes after entering standby mode.
NOTE
• Updating the software may take several hours in the worst case.
• The TV must remain in standby mode for download. Do not turn off
the power.
Press
b
/
c
/
d
to select “View setting”.
2
Now initialising...
After factory presetting,
TV will restart automatically
If the software is updated, the confirmation
message “New download information has
been detected.” appears.
• If the TV receives the update service while in
standby mode, a confirmation message displays
after turning on the power.
1
Follow the screen prompts.
2
Picture / Audio test
When external equipment is connected with the TV
powered on and there is no audio/video output, the
TV may determine which equipment could cause a
problem between the TV and the external equipment.
Go to “Menu” > “Setup” > “Information”
> “ Picture / Audio test”.
NOTE
• Terminals which can be tested:
HDMI, component, composite, D-sub
• External speakers cannot be tested. This function is available for the
TV speakers only.
Selected item
Description
Picture test
Perform a test for picture display. When
external equipment is connected but the
picture is not displayed, the test will be
performed.
Audio test
Perform a test for audio playback. When
external equipment is connected but the
audio does not playback, the test will be
performed.
