67
Viewing 3D images
NOTE
• Refer to the operation manual of the 3D glasses for
details regarding usage.
• The TV screen may temporarily become black when
the TV is trying to detect a 3D image signal and when
switching from 3D to 2D mode.
Receiving a 3D image signal that
can be detected automatically
The image signal may contain a 3D identification
signal. You can enable the TV to automatically
detect the 3D image type (Page 66).
1
Go to “Menu” > “Setup” > “Option” > “3D
setup” > “3D auto change”.
E
When “3D auto change” is set to “Yes”
• The 3D display format is detected automatically and
the appropriate 3D image is displayed.
E
When “3D auto change” is set to “No”
1
The confirmation message is displayed.
Press
3D
.
2
Press
c/d
to select “Yes”, and then press
;
.
2
Turn on the power of the 3D glasses, and then
wear the 3D glasses.
NOTE
• If you do not want to switch to 3D mode automatically,
set “3D auto change” to “No”.
• When the TV is receiving a 3D image signal that can be
detected automatically, the 3D mode icon is displayed
in the channel display.
Switching 3D to 2D mode
When you press
3D
while you are watching the TV in
3D mode, the TV switches to 2D mode.
1
Press
3D
during the 3D mode.
2
Select “Yes”, and then press
;
to switch to 2D
mode.
3
Take off the 3D glasses and turn off the power of
the 3D glasses.
NOTE
• If the input signal switches to 2D, 2D images are
displayed automatically.
• 3D mode is canceled automatically when the setting
is changed, input source is changed, the input signal
resolution is changed or the power is turned off.
Receiving a 3D image signal that
cannot be detected automatically
When the TV receives a 3D image signal that cannot
be detected automatically, you can select between
3D and 2D
image viewing.
1
Press
3D
.
• A screen appears prompting you to select between
3D and 2D image viewing.
2
Press
c/d
to select “3D” or “2D”, and then
press
;
.
E
To view in 3D mode
1
Press
c/d
to select the 3D signal type (“2D
s
3D”,“Side by Side” or “Top and Bottom”),
and then press
;
.
Side by Side
Top and Bottom
• If you select the same system as that of the input
signal, 3D images are displayed.
• You can select only “2D
s
3D” in ATV mode.
2
Turn on the power of the 3D glasses, and
then wear the 3D glasses.
E
To view in 2D mode
• Switching from 3D to 2D mode.
Press
c/d
to select the 2D signal type (“Side
by Side” or “Top and Bottom”), and then press
;
.
Side by Side
Top and Bottom
• If you select the same system as that of the input
signal, 2D images are displayed.
Enjoying 3D image viewing
