Sharp Aquos LC-70LE835E страница 54 Скачать руководство пользователя

Страница: 54 / 83

Viewing enlarged photos

Buttons for enlarged photo display operation
(When using USB media mode)

Buttons

Description

c/d

(Cursor)

Go to the previous/next photo in the

same directory.

Return to the thumbnail selection

screen.

Switch between 2D and 3D modes.

R button

Rotate the photo by 90 degrees to the

left.

G button

Rotate the photo by 90 degrees to the

right.

B button

Display “USB media menu”.

• USB device removal

Reveal/hide the guide display.

NOTE

• Rotating photos only applies to the temporarily selected

item and this setting is not saved.

Slide show

Selecting the BGM

Setup the slide show BGM from “USB media menu”

by pressing

when selecting photo thumbnails.

This function is available only for the USB media

mode.

Buttons for slide show BGM select operation

Buttons

Description

;

When selecting a music file: Play

music.

a/b/c/d

(Cursor)

Select a desired item.

When music is stopped: Return to the

previous operation.

When music is being played: Stop

music.

R button

Select/deselect items (

✔

mark appears

on the selected items).

G button

All*: Stop music.

Folder*: Move to the parent folder.

Y button

Play/pause music.

B button

Display “USB media menu”.

• Set all BGM

• Reset all BGM

• USB device removal

* The mode selected in “Folder display setting”

NOTE

• Slide show BGM will be reset in the cases below.

• Select “Reset all BGM” by pressing

during

selecting music files.

• Go back to the top menu.

• Change the “INPUT”.

• When there are invalid music files, the

mark will be

displayed for the file.

• The displayed play time may differ slightly from the

actual play time depending on the files.

Slide show

Buttons for slide show operation
(When using USB media mode)

Buttons

Description

Return to the previous operation.

Switch between 2D and 3D modes.

B button

Display “USB media menu”.

• Select slide show interval

• USB device removal

Reveal/hide the guide display.

NOTE

• The selected BGMs are played repeatedly.

• The slide show continues until you press

• Depending on the photo, the slide show interval per

photo may be longer than the interval selected in the

settings.

Other useful features

Содержание Aquos LC-70LE835E




















































































Результаты поиска

Содержание Aquos LC-70LE835E

Отзывы:

Похожие инструкции для Aquos LC-70LE835E

Бренды по названию

Популярные бренды

Sharp Aquos LC-70LE835E, Руководство по эксплуатации

Результаты поиска

Содержание Aquos LC-70LE835E

Отзывы:

Похожие инструкции для Aquos LC-70LE835E

Бренды по названию

Популярные бренды