Sharp AQUOS LC-70LE633U Скачать руководство пользователя страница 10

Страница: 10 / 60

LC-70LE632U/633U

3 – 3

2.3. Monitor microprocessor software version upgrade

Create the USB memory for monitor microprocessor software version upgrade in the same manner as explained in the “Main software version
upgrade”.

Copy the file BSMK_632-732_xxx.USB and BMSDMxxx.SMB. (named temporarily) for monitor microprocessor software version upgrade to the USB
memory.

2.3.1 How to upgrade the software

1. Unplug the AC cord.

2. Insert the USB Memory for version upgrade into the service socket.

3. Plug in the AC cord with power button pressed down.

4. After 5 seconds, unpress the power button.

CAUTION: • The moment this operation is done, the upgrading of the monitor microprocessor software starts. While the upgrade is ongoing, never

power off the unit. Otherwise the upgrade will fail and the system may be serious damaged beyond recovery (inability to start).

• After the monitor microprocessor software is upgraded, also perform the ‘Industry Init’.

5. After the unit startup, the upgrade starts. The power led will blink continuously. Also, an upgrade screen will be shown during a minor upgrade.

6. If the upgrade fails, power led will stop blinking. Also, the upgrade failure screen will be shown if upgrade screen was shown at 5.

NOTE: In the event of a transient failure, upgrade will be automatically retried up to three times. If the process repeatedly fails, hardware may be the

cause.

7. The upgrade success screen will be shown if upgrade screen was shown at 5.

8. Unplug the AC cord and remove the USB Memory for version upgrade.

9. Now the software version upgrade is complete.

NOTE: When you are done with the software version upgrade, start the set, go to the top page of the adjustment process screen and check the mon-

itor microprocessor software version information and panel size information.

MAIN

SUB MICOM

PANEL EEPROM

IR MICOM

MAIN Version

SUB MICOM Version

PANEL EEPROM

IR MICOM Version

NO DATA

50%

NO DATA

㧙㧙㧙㧙㧙

0.820

㧙㧙㧙㧙

1.00

70LE632U

Software Update

MAIN

UPGRADE FAILURE

SUB MICOM

PANEL EEPROM

IR MICOM

MAIN Version

SUB MICOM Version

PANEL EEPROM

IR MICOM Version

NO DATA

SAME VERSION

NO DATA

㧙㧙㧙㧙㧙

㧙㧙㧙㧙

1.00

70LE632U

Software Update

MAIN

UPGRADE SUCCESS

SUB MICOM

PANEL EEPROM

IR MICOM

MAIN Version

SUB MICOM Version

PANEL EEPROM

IR MICOM Version

NO DATA

100%

NO DATA

㧙㧙㧙㧙㧙

0.820

㧙㧙㧙㧙

1.00

70LE632U

Software Update

Содержание AQUOS LC-70LE633U





























































Результаты поиска

Содержание AQUOS LC-70LE633U

Отзывы:

Похожие инструкции для AQUOS LC-70LE633U

Бренды по названию

Популярные бренды

Sharp AQUOS LC-70LE633U, Руководство по обслуживанию

Результаты поиска

Содержание AQUOS LC-70LE633U

Отзывы:

Похожие инструкции для AQUOS LC-70LE633U

Бренды по названию

Популярные бренды