Basic adjustment
NOTE
The item marked with * is available only when selecting “INPUT1”,
“INPUT2”, “INPUT3” or “INPUT7” (PC) from the “INPUT SOURCE”
menu.
The item marked with ** is available only when accepting an
“x.v.Colour” signal through an HDMI terminal.
•
•
Monochrome
For viewing a video in black & white.
Range of OPC
The brightness level range of the OPC sensor’s
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of
e
16 and a minimum of
f
16.
Selectable
items
Description
Max.
f
16 through
e
16
Min.
f
16 through
e
16
NOTE
This function is available only when the “OPC” setting is set
to “On” or “On:Display”.
The maximum setting cannot be set to a smaller number
than the minimum setting.
The minimum setting cannot be set to a bigger number
than the maximum setting.
The maximum and minimum settings cannot be set to the
same number.
Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
•
•
•
•
•
STANDARD:
For a highly defined image in a normally bright
room.
MOVIE:
For viewing a movie in a darkened room.
MOVIE (Living room):
For viewing a movie such as CG
animation with dynamic picture quality.
GAME:
For playing of video games.
PC*:
For PC.
x.v.Colour**:
Produce realistic colour on the TV screen unlike any
other signal.
USER:
Allows you to customise settings as desired. You can set
the mode for each input source.
DYNAMIC (Fixed):
For a clear-cut image emphasising high
contrast for sports viewing (The “Picture” and “Audio” settings
cannot be adjusted).
DYNAMIC:
For a clear-cut image emphasising high contrast for
sports viewing.
NOTE
“3D-Y/C” may not operate depending on the input signal
type or when the input signal is noisy.
“3D-Y/C” has even more effect on composite video signals
(CVBS).
•
•
Active Contrast
Automatically adjusts the contrast of an image
according to the scene.
Gamma setup
Select the tone difference of the brightness and
darkness of the picture according to the type of
programme watched from the four items (“Mode1”,
“Mode2”, “Mode3” or Mode4”).
NOTE
When AV MODE is set to“x.v.Colour ”or “PC”, you can not
change the gamma selection.
DNR
“DNR” produces a clearer image (“Off”, “High”,
“Middle”, “Low”).
3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise by detecting changes in the
image.
•
Standard:
Normal adjustment.
Fast:
Sets the optimum image quality for fast-moving
images.
Slow:
Sets the optimum image quality for slow-moving
images.
Audio Settings
Audio
ECO
Balance
Treble
SRS TS XT
Sound Mode
Reset
[ 0]
[ 0]
–15
L
+15
R
[Off]
[Mode4]
Bass
[ 0]
–15
+15
DYNAMIC
Set
Audio Adjustment
Audio
You can adjust the sound quality to your preference
with the following settings.
Selectable
items
c
button
d
button
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio from
the right speaker
Decrease audio from
the left speaker
NOTE
For resetting all adjustment items to factory preset values, press
a
/
b
to select “Reset”, press
ENTER
, press
c
/
d
to select “Yes”,
and then press
ENTER
.
•
AV MODE
“AV MODE” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image input
from external equipment.
Press
AV-M
(AV MODE).
Each time you press
AV-M
(AV MODE), the
mode changes.
You can also switch the mode on the “Picture” and
“Audio” menu screen by pressing
AV-M
(AV MODE).
1
2
•
23
Item
Item
LC-65XS1M_en.indd 23
LC-65XS1M_en.indd 23
2009/01/15 16:03:24
2009/01/15 16:03:24
