Sharp Aquos LC-60LE950X, Руководство по эксплуатации

Страница: 54 / 96

52
Network function
Option
Key lock
This function allows you to lock the buttons on the TV
or remote control unit in order to prohibit children from
changing the channel or volume.
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “Key lock”.
Item
Off Unlocks the buttons.
RC control lock
Locks all buttons on the remote control
unit.
Button control
lock Locks the buttons on the TV except the
power switch.
NOTE
• You cannot set both “RC control lock” and “Button control
lock” at the same time.
E
Cancelling the lock
Press
@
on the TV and set to “Off” to cancel the
“RC control lock”. Press
@
on the remote control
unit and set to “Off” to cancel the “Button control lock”.
NOTE
• See page 18 for the functions of the TV control panel buttons.
•
To cancel “Button control lock”, use the remote control.
Playing Back Files from a Portable
Device or PC
With the remote playback function, you can use your
portable device to playback pictures, video and music on
the home network server.
• The TV has obtained DLNA’s Digital Media Renderer (DMR)
certification.
• To use the remote playback function, your portable device or
PC must be a DLNA Certified Digital Media Controller.
• Please ensure that the TV and portable device or PC are in
the same network environment, and set portable device as
the server of TV.
For the network setting of TV, please refer to pages 52 – 54.
Easy share setting
1
Go to “HOME” > “TV Menu” > “Setup” > “View
setting” > “Network setup” > “Easy share setting”.
2
Press
a
/
b
to select the item to be adjusted, and
then press
?
to set.
E
Set easy share permission
Before this function can be used, you need to set the TV
to the status of being able to receive contents.
Item
On
Receiving and playing contents from
portable device or PC are allowed.
Off
Receiving contents from portable device
or PC is not allowed.
E
Time out setting
This sets the time until the TV returns automatically to TV
mode after remote playback ends.
Item
10 sec./60 sec.
When the set time has elapsed after
remote playback ends, the TV returns
automatically to TV mode.
No
Select this to manually switch the TV
after remote playback ends.
NOTE
• This function may not work while an Internet application is
being used.
• Due to reasons including network environment, it may take
some time for the TV to start playing after the dragging
operation.
• If the wireless signals are too complicated, or multiple wireless
access points are available, operations may not be performed
properly due to signal interference.
• Some file formats may not match. For the file formats
supported by this function, please see Home network
server compatibility on page 67.
Useful viewing functions
LC70LE950X_EN_book.indb 52 LC70LE950X_EN_book.indb 52 8/3/2013 10:01:54 AM 8/3/2013 10:01:54 AM