15
Digital broadcast setting
Press
c/d
to select “Terrestrial” or “Cable”,
and then press
;
.
Terrestrial
Cable
E
Searching for terrestrial broadcasts
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress,
press
6
.
NOTE
• A region or service selection screen may display
depending on the country settings or cable providers
selections. Follow the screen prompts to make the
selections.
840 series only
After searching for terrestrial channels, the screen
switches to the “Satellite search” setting (Page 16).
E
Searching for cable broadcasts
To change each item to the appropriate settings:
1
Press
a/b
to select
the menu, and then
press
;
.
2
Press
a/b/c/d
or
0
_
9
to select or input
the appropriate item/
value, and then press
;
.
Scrambled stations
[Yes]
Search method
[Channel]
Start frequency
Network ID
[None]
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start
3
Press
a/b
to select “Search start”, and then
press
;
.
4
Press
c/d
to select “Yes” to start searching
cable broadcasts, and then press
;
.
5
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress,
press
6
.
840 series only
After searching for cable channels, the screen
switches to the “Satellite search” setting (Page 16).
Menu
Description
Selectable items
Scrambled
stations
Specifies if you
need to add pay-
TV services.
Yes, No
Search method
Specifies how
you search for
channels.*
2
Channel,
Frequency, Quick
Start frequency
From 47.0
_
858.0
MHz
Network ID
Specifies the
network.*
3
None, 0
_
65535
Symbol rate 1/
Symbol rate 2*
1
Input the value
received for
CATV.*
4
1000
_
9000
QAM
modulation 1
16, 32, 64, 128,
256
QAM
modulation 2
None, 16, 32, 64,
128, 256
I
Set up “Symbol rate 2” if the cable provider uses
several symbol rates.
J
Details about the “Search method” items are as
follows:
_
Channel: Extracts all information from a channel
(quick, but needs corresponding TV stations).
_
Frequency: Checks every frequency in range (slow).
_
Quick: All services are searched by one frequency.
This menu works only when your cable provider
provides the frequency and the network ID (e.g.,
Homing channel). When “Quick” is selected,
“Scrambled stations” is automatically set to “No”, and
“None” for the “Network ID” menu cannot be selected.
K
Set this to register only the specified network ID
without registering any special services.
L
The symbol rates are specified by the cable provider.
Analogue broadcast setting
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress,
press
6
.
840 series only
After searching for analogue channels, the screen
switches to the “Satellite search” setting (Page 16).
Initial auto installation
