background image

 

9

Information display

Press  . The program information will appear for 
approx. 5 seconds.

Quick View

 button allows you to go back to the last selected 

TV channel.
When you press 

 during external input mode, TV 

switches to the last channel.
Also, when you press 

 during TV, you will not 

return to external input mode, but only switch channels 
between last channel and current channel.

MUTE

Press  . The sound will be cut off.
The MUTE can be released by pressing   again or 

 (Volume) + 

or

 -

.

Still picture

Press 

FREEZE

 to make a still picture. To cancel the 

still picture, press 

FREEZE

 again.

NOTE 

• The still picture function is available only for TV and AV-input 

mode.

• During still picture mode, Aspect Ratio feature is not 

available. (If you press 

PICTURE SIZE

, still picture mode 

will be canceled.)

• During the playback of a movie 

fi

 le in MEDIA mode, still 

picture function is not available.

NOTE 

• During TV or external input mode, if there is no signal 

reception, the TV will change to standby after approx. 15 
minutes (PC mode: 5 minutes).

• Some functions are activated and de-activated with the 

same key. Others require 

RETURN

 key for de-activating.

Teletext

Teletext is sent page by page. This unit is able to 
automatically store up to 899 pages, but they can only 
be accessed once they have been stored. This can 
take a few moments.

TT Language menu allows the installation of the 
teletext language.

The languages displayed are only those supported by 
the channel.

Fastext/TOPtext

The Fastext/TOPtext is teletext with a special directory.
On the lower part of the screen there are four different 
coloured 

fi

 elds (red, green, yellow and blue). These 

fi

 elds lead directly to the pages shown within. The 

coloured buttons on the remote control correspond 
to the coloured 

fi

 elds. Press the appropriate coloured 

button in order to activate the desired colour 

fi

 eld.

Switch on / off Teletext

Teletext is not transmitted by all channels.
Select a channel that shows teletext.
Press 

. You will now see a teletext page. 

(If “100” is shown without any text information, it may 
mean that the channel you have selected does not 
support teletext.)
Press 

 again. Teletext and TV picture are shown 

simultaneously.
Press 

 again in order to switch off teletext.

Press 

 again in order to switch on teletext again. The 

last page which was stored is now shown.

NOTE 

• You cannot select any other channels as long as teletext is 

switched on. Switch teletext off when you want to switch 
over to another channel.

Select Page

Press 

P +/-

 until the page you desire appears. Or ... 

enter the requested page number by using the 

10 

Number Buttons

.

And if you mistype something, just enter the complete 
3-digit wrong page number then enter the desired 
number again. Or ... press one of the coloured teletext 
buttons so that a page from Fastext/TOPtext is shown.

Hold Pages

Some pages are divided up into subpages by the 
channel.
Subpages are automatically shown in turn, as they are 
transmitted. In order to hold the page, press 

. Press 

 again in order to display the next subpage.

Directly Select Subpages

You can directly select the subpages if required. You 
may use one of two operations.

1. Press 

 in order to select subpage 2. 0 0 0 0 

is shown. Enter 

0 0 0 2

. It can take a minute before 

subpage 0002 appears. Press 

 again in order 

to switch off the subpage feature.

Or:
2. Wait a few seconds, and the right now available 

subpages will be shown in the bottom line. Select 
your page with 

c

/

d

Enlargement

In order to enlarge the display, press  .
Either the upper or lower half of the screen is enlarged.
Each time you press   you switch between the 
display of the upper or lower half of the screen or the 
full picture.

Answering Quiz Questions

Some pages contain quiz questions with concealed 
answers.
Press 

 in order to show the answers.

J3QQ1401C_EN.indd   9

J3QQ1401C_EN.indd   9

5/27/2013   2:03:23 PM

5/27/2013   2:03:23 PM

Содержание Aquos LC-50LE440M




















Отзывы: