Sharp AQUOS LC-45LE280X Скачать руководство пользователя страница 10

19

20

System options

Power control

Power control setting allows you to save energy.

H

 No signal off

You can set the TV to automatically power off in 

about 15 minutes after the TV goes into a state of 

receiving no programme signals. (Enable, Disable)

• 

Five minutes before the power shuts down, the remaining 

time displays every minute.

NOTE 

• 

When a TV programme finishes, and the TV receives signal 

input, this function may not operate.

H

 No operation off

You can set the TV to automatically power off when 

no TV operation is performed for more than 3 hours. 

(Disable, 3 hours, 30 min.)

• 

Five minutes before the power shuts down, the remaining 

time displays every minute.

View option

H

 Wide mode

You can manually select the size of a picture 

appeared on your screen.

Selectable picture size varies with the type of signal 

received.

Press 

a

/

b

 while the wide mode menu displays on 

the screen.

• 

As you toggle down the options, each mode is immediately 

reflected on the TV.

Item (for SD [Standard-Definition] signals)

Normal

Keeps the original aspect ratio in a full 

screen display.

Zoom 14:9

For 14:9 letterbox pictures. A thin side bar 

appears on each side, and you may also 

see bars on the top and bottom with some 

programmes.

Panorama

In this mode, the picture is stretched 

toward each side of the screen. The picture 

may appear similar to “Full” depending on 

broadcast signals.

Full

For 16:9 squeeze pictures.

Cinema 16:9

For 16:9 letterbox pictures. Bars may 

appear on the top and bottom with some 

programmes.

Cinema 14:9

For 14:9 letterbox pictures. Bars may 

appear on the top and bottom with some 

programmes.

Item (for HD [High-Definition] signals)

Full

Displays with an overscan image. Crops all 

sides of screen.

Underscan

Display with an Underscan image only 

when receiving a 720p signal. Display 

with the High-Definition image adjusted 

optimally. Noise may appear on the edge 

of the screen with some programmes.

Dot by Dot

Displays an image with the same number 

of pixels on the screen.

NOTE 

• 

“Zoom 14:9” and “Cinema 14:9” will appear only for TV 

mode.

• 

Some items do not appear depending on the type of 

received signal.

System options (Continued)

H

 4:3 mode (DTV input mode only)

The 4:3 mode allows you to select between “Normal” 

and “Full”.

Selected item

Description

Normal

Normal range keeping 4:3 or 16:9 

aspect ratio. 

Full

Wide image without side bars.

4:3 screen types

4:3 mode “Normal”

4:3 mode “Full”

H

 Auto wide (DTV input mode only)

The “Auto wide” allows the TV to switch automatically 

among the different picture size. (Off, On)

NOTE 

• 

Use “Wide mode” if an image does not switch to the 

appropriate picture size. When the broadcast signal 

contains no aspect ratio information, the function will not 

work even if enabled.

H

 Change audio

MPX

Allows you to change the audio when multiple audio 

is available for the programme you are watching.  

(Auto, MONO)

Bilingual

Select from among 3 kinds of mode: DUAL I,  

DUAL II and DUAL I + II.

Audio only

When listening to music from a music programme, 

you can turn the screen off and enjoy audio only.

Selected item

Description

Off

Both screen images and audio are 

output.

On

Audio is output without screen image.

NOTE 

• 

When you make operations that change the picture on the 

TV such as by changing the input source, the “Audio only” 

function is set to “Off”.

Audio description (DTV input mode only)

This function allows you to adjust volume output of 

audio description if the TV receives a signal including 

audio description.

Switching the multi audio languages

Each time you press 

MPX

 on the remote control, the 

audio language switches.

1st audio language

1st audio language

+AD (if available)

2nd audio language

+AD (if available)

2nd audio language

• • • •

NOTE 

• 

This function is valid only if broadcaster is transmitting 

audio description.

Hearing impaired (DVB subtitle)

Each time you press 

[

 on the remote control, 

the subtitle switches when the broadcast contains 

subtitle information.

Set “Hearing impaired” to “On”

(Hearing impaired)

1st language

2nd language

Off

• • • • • • • •

Set “Hearing impaired” to “Off”

1st language

2nd language

(Hearing impaired)

Off

• • • •

NOTE 

• 

This function is valid only if broadcaster is transmitting 

multilingual subtitles.

Digital audio language

Set up to two preferred multi audio languages to 

display if the audio languages are available.  

(1st language, 2nd language)

NOTE 

• 

If audio for the selected languages is not included in 

a received broadcast, audio will not be output for that 

language.

H

 Change subtitle

You can display subtitles for the hearing impaired in 

the Teletext broadcast if the subtitle languages are 

available. (1st language, 2nd language)

NOTE 

• 

If subtitles for the selected language are not included in 

a received broadcast, subtitles will not be shown for that 

language.

LC-45LE280X_G753_EN.indd   10

11/15/2016   4:09:01 PM

Содержание AQUOS LC-45LE280X

















Отзывы: