33
Basic adjustment settings
No Signal off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
Press
a
/
b
to select “No Signal Off”, and
then press
ENTER
.
Press
c
/
d
to select “Enable”, and then
press
ENTER
3
4
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
• When a TV programme finishes, and the AVC System
receives signal input, this function may not operate.
Press
c
/
d
to select “Power control”.
• Power control menu displays.
2
Press
MENU
and the MENU screen displays.
1
No Operation off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Press
a
/
b
to select “No Operation Off”, and
then press
ENTER
.
Press
c
/
d
to select “Enable”, and then
press
ENTER
.
3
4
•
Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
Press
c
/
d
to select “Power control”.
• Power control menu displays.
2
Press
MENU
and the MENU screen displays.
1
Power control
Power control setting allows you to save energy.
Power control for AV source
Power control for PC source
Power management
When set, the power will automatically shut down if no
signal is input for a certain time.
Press
a
/
b
to select “Power Management”,
and then press
ENTER
.
Press
a
/
b
to select “Mode1” or “Mode2”,
and then press
ENTER
.
3
4
Description
• No power management
• Factory preset value.
• If no signal inputs for 8 minutes, the power
shuts down.
• Even if you start using the PC and the signal
inputs again, the System stays off.
• The System turns on again by pressing
POWER
. (See page 17.)
• If no signal inputs for 8 seconds, the power
shuts down.
• When you start using the PC and the signal
inputs again, the System turns on.
• The System turns on again by pressing
POWER
. (See page 17.)
Selected item
Off
Mode1
Mode2
Press
c
/
d
to select “Power control”.
• Power control menu displays.
2
Press
MENU
and the MENU screen displays.
1
Off
Mode1
Mode2
NOTE
• If you turn off the power by disconnecting AC cord when
setting “Mode2” in power management, the TV may not
function properly after turning the power on again. In such
case, press
POWER
on the remote control unit.
• Pressing
POWER
on the display will have the same result.
• When selecting “PC digital” in Input Select and setting
“Mode 2” in power management, depending on the model
of the computer, the power may not turn back on
automatically even if the signal inputs again.
LC-45G1X(E)-e
04.10.15, 10:04 AM
33
