18
QUICK PROBLEM-SOLVING TIPS
:
hen you experience an issue with your TV, turn it off and on again. If this does not resolve the problem, then refer to the tips below. If
the problem is still not resolved, then contact us at one of the phone numbers on Page 2.
ISSUES
POSSIBLE SOLUTIONS
No sound or picture
Check if the power cord is plugged into a powered AC outlet.
Press the
Po
Z
er
E
utton
on the remote control to activate the unit from 'Standby' mode.
Check to see if the LED light is on or not. If it is, then the TV is receiving power.
I have connected an external
source to my TV and I get no
picture and/or sound.
Check for the correct output connection on the external source and for the correct input connection on the TV.
Make sure you have made the correct selection for the input mode for the incoming signal.
:
hen I turn on my TV, there is a
delay for a few seconds before the
picture appears. Is this normal?
Yes, this is normal. The TV is initializing and searching for previous setting information.
The picture is normal but there is
no sound
Check the volume settings.
Check if 'Mute' mode is set to
On
.
Sound but no picture or black and
white picture
If the picture is black and white, unplug the TV from the AC outlet and replug it after 60 seconds.
Check that the Color is set to 50 or higher.
Try different TV channels.
The sound and/or picture is
distorted or appears wavy
An electric appliance may be affecting the TV. Turn off any appliances that are nearby and move it farther away
from the TV.
Insert the power plug of the TV set into another power outlet.
The sound and picture is blurry or
cuts out
If using an external antenna, check the direction, position and connection of the antenna.
Adjust the direction of your antenna or reset or
¿
ne tune the channel.
A horizontal or vertical stripe
appears on the picture and/or the
picture is shaking
Check if there is an appliance or electric tool nearby that is causing interference.
Содержание AQUOS LC-43N6100N
Страница 1: ...ES G154924 1 ...
