21
Direct Button Operation
An image from the selected source
•
automatically displays.
Each time
•
INPUT
is pressed, the
input source toggles.
If you press
•
a
/
b
to select the
input source, press
Enter
to
confirm your selection.
See page 17-18 for external equipment
•
connection.
MUTE
Mutes the current sound output.
Press
MUTE
.
Mute can be canceled by using the
•
method below.
- Mute will be canceled if you press
VOL
+/-
or
MUTE
.
SLEEP
Allows you to set a time when the TV
automatically switches to standby.
Press
SLEEP
.
The remaining time displays when
•
the sleep timer has been set.
Each time you press
•
SLEEP
, the
remaining time switches as shown
below.
Off
,
10
,
20
,
30
,
40
,
50
,
60
,
90
,
120
When set, the time automatically
•
starts counting down.
If you want to adjust the sleep
•
timer, you can press
SLEEP
twice
then change the time setting.
One minute before the time
•
expires, the remaining time
displays every second.
Select
•
"Off"
by pressing
SLEEP
to
cancel the sleep timer.
The TV will enter standby mode (power
•
indicator lights red) when the remaining
time reaches zero.
Changing Channels
You can change channels by pressing
CH
+/-
or
0-9
, or
• (DOT)
.
Examples:
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press
5
ENT
.
To select a 3-digit channel number
(e. g., Channel 115):
Press
1
1
5
ENT
.
To select a 4-digit channel number
(e. g., Channel 22.1):
Press
2
2
• (DOT)
1
ENT
.
When selecting a 1-digit channel
•
number, it is not necessary to press
0
before the number.
Changing Volume
You can change the volume by pressing
VOL
k
/
l
on the TV or on the remote
control unit.
To increase the volume, press
•
VOL
k
.
To decrease the volume, press
•
VOL
l
.
INPUT
To view external source images, select the
input source using
INPUT
on the remote
control unit or
INPUT
on the TV.
Press
1.
INPUT.
A list of selectable sources
•
appears.
Press
2.
INPUT
again to select the input
source.
