Sharp Aquos LC-42BX5H, Руководство по обслуживанию

Страница: 19 / 154

LC-42BX5H/M/X
5 – 6
6. Factory setting
6.1. Performing the factory setting using the remote control for adjustment
1. Perform the factory setting using the remote control for adjustment. (This setting must be done after performing the MCL data setting.)
2. “H” standing for factory setting 1, “M” standing for factory setting 2, “A” standing for factory setting 3 or "X" standing for factory setting 4 is dis-
played in the upper left portion of the screen by continuing to press the Factory Setting key on the remote control for adjustment. (The figure below
is the screen for factory setting 2.)
3. When “SETTING COMPLETE” is displayed in the middle of the screen after a few seconds, setting is complete.
4. Turn off the power.
NOTE: Set the Power switch to “OFF” immediately after completing the factory setting.
After the Factory setting 4 (X version) is implemented, confirm that the frequencies of only the following 5 channels are adjusted to Australian chan-
nels.
Model name Key name Remote control code Setting S-SYSTEM Set OSD language
LC-42BX5H Factory setting 1 (H) 100000111111110 I ENGLISH
LC-42BX5M Factory setting 2 (M) 100000001010110 B/G ENGLISH
LC-42BX5A Factory setting 3 (A) 100001101011110 D/K CHINESE
LC-42BX5X Factory setting 4 (X) 100001001001110 B/G ENGLISH
TV-CH Fv(MHz)
2 64.25
7 182.25
9 196.25
10 209.25
28 527.25
M
M
SETTING COMPLETE