11
12
Setup menu
Auto installation
Programme setup
Child lock
Input label
4
HDMI A
Vi
4
Position
Setup
Option
Input skip
H
Child lock (TV input mode only)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
1
Repeat steps 1 to 2 in
Menu operation
.
2
Press
a
/
b
to select “Child lock”, and then
press
ENTER
.
3
If you already set the password, enter it here.
4
Press
a
/
b
to select “Change password”, and
then press
ENTER
.
5
Enter the 4-digit number as a password using
0 — 9
.
Change password
Clear password
New password
– – – –
Reconfirm
–
– – –
Enter your new password. Use 4 digits
4
6
Enter the same 4-digit number as in step 5 to
confi rm.
NOTE
• To view a locked channel (Lock setting in Programme
setup “Manual adjust” is set to “On”), you must enter a
password. When you select a locked channel, “Child lock
has been activated.” is displayed.
• Press
ENTER
to display the password input window.
Clearing the password
Allow you to clear your password.
1
Repeat steps 1 to 3 in
Setting a password
.
2
Press
a
/
b
to select “Clear password”, and
then press
ENTER
.
3
Press
c
/
d
to select “Yes”, and then press
ENTER
.
H
Input skip
This setting allows you to skip the HDMI or RGB
input on the input source selection operation.
INPUT1(HDMI)
INPUT2(HDMI)
INPUT3(HDMI)
INPUT7(RGB)
Yes
No
Skip input selection of HDMI
Setup menu (Continued)
H
Quick start
You can reduce the TV’s start-up time after turning
on the power with the remote control unit.
Selected item
Description
On
The TV quickly starts up from standby,
more of power consumption is required
during standby.
Off
Power consumption is less than 1 W.
H
Language
Select from among 10 languages: English, Simplifi ed
Chinese, Arabic, French, Portuguese, Russian,
Persian, Thai, Vietnamese and Indonesian.
H
Text language
Select from among 3 kinds of language: West
Europe, Arabic, Farsi.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
H
Identification
You can check the current version of the software on
the screen.
H
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute “Reset”, all the settings such as Picture, Audio
and Programme will be reset to the factory preset values.
Option menu
[ HDMI1]
[ Fixed]
[ On]
Option
PC audio select
Input select
Output volume select
Auto volume
4
H
Input select
For setting the signal type of external equipment.
Input source
Selectable item
INPUT4
Auto, S-VIDEO, VIDEO
H
PC audio select
When using the INPUT 7 terminal or HDMI1 terminal,
you must select which terminal uses the AUDIO IN
(R/L) jack for analogue audio input.
Selected item
Description
HDMI1
When connecting devices (including a
PC) with DVI/HDMI cable to the INPUT
1 terminal and inputting analogue audio
signals from the AUDIO IN (R/L) jack.
INPUT7
(RGB)
When connecting a PC to the INPUT 7
terminal, and inputting analogue audio
signals from the AUDIO IN (R/L) jack.
H
Input label
You can assign each input source a label as you
prefer.
1
Press
INPUT
to select the desired input source.
2
Press
MENU
and the MENU screen displays.
3
Press
c
/
d
to select “Setup”.
4
Press
a
/
b
to select “Input label”, and then
press
ENTER
.
5
Press
a
/
b
/
c
/
d
to select each character of the
new name for the input source, and then press
ENTER
.
6
Repeat until the name is fully spelt out.
• The name can be 6 characters or less.
• When you want to set an input source name of less
than 6 characters, select “END”, then press
ENTER
to exit from the labelling menu.
NOTE
• You cannot change labels if the input source is TV.
H
Position
For adjusting a picture’s horizontal and vertical
position.
Selected item
Description
H-Position
Centres the image by moving it to the left
or right.
V-Position
Centres the image by moving it up or
down.
H
HDMI auto view (HDMI input mode only)
Selected item
Description
Enable/
Disable
Set whether or not to use the Auto
Selection of WIDE MODE based on
signal recognition, received from the
HDMI signal.
H
WSS
WSS allows a television to switch automatically
among the different screen formats. (On, Off)
NOTE
• Try to set the WIDE MODE manually if an image does not
switch to the correct screen format. When the broadcast
signal contains no WSS information, the function will not
work even if enabled.
• Not available for COMPONENT, PC and HDMI signal.
H
4:3 mode
The WSS signal has 4:3 auto-switching that allows
you to select between Panorama and Normal.
Selected item
Description
Panorama
Wide image without side bars
Normal
Normal range keeping 4:3 or 16:9 aspect
ratio
WSS signal 4:3 screen
4:3 mode “Panorama”
4:3 mode “Normal”
NOTE
• When connecting devices (including a PC) with digital
audio signal by using HDMI-certifi ed cable to INPUT 1
terminal, you must set to “INPUT7(RGB)”. If “HDMI1” is
set, there will be no sound output.
H
Output volume select
Allows you to select what controls the audio output.
Selected item
Description
Fixed
• Sound via speakers is adjusted with
VOL
k
/
l
on the remote control unit
or the TV.
• Sound via the AUDIO OUT terminal
is not adjustable and constantly
outputs.
Variable
• Sound via the AUDIO OUT terminal
is adjusted with
VOL
k
/
l
on the
remote control unit or the TV.
• Sound via speakers is muted.
NOTE
• During “Output volume select” is set to “Variable”, all Audio
menu item cannot be adjusted.
H
Auto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels. (On, Off)
H
Clear voice
This function emphasises speech against
background noise for greater clarity. (On, Off)
NOTE
• Clear voice only work when SRS TS HD is “On”.
H
Digital audio output
This function allows you to select your favourite
audio output system.
Selected item
Description
Dolby Digital
Dolby Digital audio will be output when
there is a Dolby Digital audio signal. The
output will be in PCM when there is no
Dolby Digital audio signal.
PCM
The optical output format is normally in
PCM.
H
Audio only
When listening to music from a music programme,
you can set the display off and enjoy audio only.
Selected item
Description
On
Audio is output without screen image.
Off
Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio only
function is set to “Off”.
LC32M450M_EN.indd 6
LC32M450M_EN.indd 6
6/28/2011 4:56:35 PM
6/28/2011 4:56:35 PM
