background image

9

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause

chemical leakage in old batteries.

• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you

find any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.

Inserting the batteries

Before using the TV for the first time, insert two “AAA” size batteries (supplied).  When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.

Using the remote control unit

Use the remote control unit by pointing it towards the remote sensor window.
Objects between the remote control unit and sensor window may prevent proper
operation.

Cautions regarding remote control unit

• Do not expose the remote control unit to shock.

In addition, do not expose the remote control unit to liquids, and do not place
in an area with high humidity.

• Do not install or place the remote control unit under direct sunlight.

The heat may cause deformation of the unit.

• The remote control unit may not work properly if the remote sensor window of

the Display is under direct sunlight or strong lighting. In such case, change
the angle of the lighting or Display, or operate the remote control unit closer to
the remote sensor window.

Preparation

30

°

30

°

Remote

control sensor

7 m

23 feet

1

Press and slide the battery cover to open it.

2

Insert two supplied “AAA” size batteries.

• Place batteries with their terminals corresponding to

the (

e

) and (

f

) indications in the batter y

compartment.

3

Close the battery cover.

LC-32GA4E(E)-b

04.5.30, 9:06 AM

9

Содержание AQUOS LC-32GA4E































































Отзывы: