Sharp Aquos LC-30HV4U Скачать руководство пользователя | Manualshive

Страница: 5 / 86

background image

4

IMPORTANT SAFETY PRECAUTIONS

• Cleaning — Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners

or aerosol cleaners. Use a damp cloth for cleaning.

• Water and Moisture — Do not use this product near water – for example, near a bath tub,

wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the
like.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the

product on an unstable base can cause the product to fall, resulting in serious personal
injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. When mounting the product on
a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware
recommended by the manufacturer.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do

not cover or block these vents and openings since insufficient ventilation can cause
overheating and/or shorten the life of the product. Do not place the product on a bed, sofa,
rug or other similar surface, since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in an enclosed place such as a
bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are
followed.

• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when

the product is dropped or applied with impact. Be careful not to be injured by broken glass
pieces in case the panel breaks.

• The Liquid Crystal panel is a very high technology product with 2,949,120 thin film transistors, giving you fine picture

details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note
that this does not affect the performance of your product.

Precautions when transporting the display

When transporting the display, never carry it by holding onto the speakers. Be sure to always carry the display by two
people holding it with two hands-one hand on each side of the display.

• Heat — The product should be situated away from heat sources such as radiators, heat

registers, stoves, or other products (including amplifiers) that produce heat.

• A product and cart combination should be moved with care. Quick stops, excessive force,

and uneven surfaces may cause the product and cart combination to overturn.

«
...
3
4
5
6
7
...
»

Содержание Aquos LC-30HV4U























































































Отзывы:

Нет отзывов

Похожие инструкции для Aquos LC-30HV4U

Бренд: IAdea Страницы: 11

Бренд: Supersonic Страницы: 30

Бренд: KC Страницы: 36

Бренд: Sansui Страницы: 27

Бренд: Telefunken Страницы: 34

Бренд: Quasar Страницы: 24

Бренд: Akai Страницы: 131

MTS Stereo Color TV

Бренд: Zenith Страницы: 44

NVR-7505-24HD-N

Бренд: Nevir Страницы: 61

Бренд: Grundig Страницы: 33

Бренд: AOC Страницы: 114

Бренд: Sylvania Страницы: 28

SENTRY 2 SY2765

Бренд: Zenith Страницы: 26

Бренд: Zenith Страницы: 60

Viera TX-L32G20BA

Бренд: Panasonic Страницы: 108

Бренд: Panasonic Страницы: 354

Бренд: Auria Страницы: 2

Бренд: Hitachi Страницы: 84

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды