3
4
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from
being damaged.
1
Confi rm the screws supplied with the TV.
Screw driver
Screw
Soft cushion
Screws (
m
4)
(used in step 1 and 3)
2
Insert and hook post into stand base slot holes.
(
1
)
Fix the post using short screw.
3
Insert the stand base to the stand post on the
bottom of the TV. (
2
)
4
Insert and tighten the 3 screws into the 3 holes
on the bottom of the stand base. (
3
)
NOTE
• To detach the stand, perform the steps in reverse order.
• Do not attach or detach the stand without holding it. Doing
so can cause the stand to fall, resulting in serious personal
injuries as well as damage to the stand.
Antenna connection
Connect antenna cable to the antenna terminal
or
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug (IEC
169-2), plug it into the antenna jack at the rear of
the set.
If your outdoor antenna uses a 300-ohm twin-
lead fl at feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
CAUTION
•
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH
THE AC CORD CONNECTED.
NOTE
• Place the TV close to the AC outlet, and keep the power plug within reach.
LC-24LE150M_F906_EN.indd 2
LC-24LE150M_F906_EN.indd 2
6/11/2013 12:00:27 PM
6/11/2013 12:00:27 PM
