UPDATE FOR VCTP SOFTWARE
13. Select the "Address", then input the "0x7ffff", and press the "OK".
14. Press the "Load Bin
→
Flash".
The following window will appear, writing will start. After the finishing of the writing, window will close.
15. Finish the writing, unplug the AC cord, and remove the MICON PROGRAM JIG KIT 25-4 (JG203).
16. Insert the AC cord again, turn on the power.
17. Press both VOLUME DOWN button on the set and Channel button (2) on the remote control for 2 seconds.
18. Confirm that displayed version agreement with writing.
C-11