16
EZ SETUP during the First Power On (Continued)
EZ SETUP (WITH AUTO CLOCK SETTING) (Continued)
START EZ SE TUP?
CONNECT ANTENNA OR CABL E.
YES
NO
EX I T :
MENU
SELECT :
ENTER :
ENTER
PL EASE WA I T
AUTO PROGRAMMI NG
STOP :
2
STEREO
<
ON A I R
SAP
MONO
11 : 5 3AM
A
•
Do not let the EZ SETUP screen remain unattended for a long time.
•
If EZ SETUP does not memorize all the channels in your region, please refer to pages 33 and 34 for more
information on manually memorizing the channels using CHANNEL SETTING.
•
It may be difficult to preset when the broadcasting signals are weak, the channel cycle frequency is incorrect or
the frequency jamming is occurring around the area. Please refer to pages 33 and 34 for more information on
manually memorizing channels using CHANNEL SETTING.
•
If there are no channels with EDS signals or the antenna signal is weak, the AUTO CLOCK Setting may not
operate. In this case, a “EDS CH IS NOT AVAILABLE” message will display and the mode will change to MANUAL
CLOCK Setting. Refer to page 19 to set the clock manually.
PL EASE WA I T
NOW SEARCH I NG T IME
STOP :
CH
VOL
POWER
ENTER
DISPLAY
MUTE
SLEEP
PIC. FLIP
BRIGHT TV/VIDEO MENU
FLASH-
BACK
ENTER/
a
/
b
/
c
/
d
MENU
6
Press
a
/
b
to select YES, and
press
ENTER
.
If you want to stop the EZ SETUP
process once it has started, press
c
and it will be canceled. If you
want to SET UP again, please refer
to pages 33 and 34 on SET UP.
To cancel EZ SETUP
Press
c
.
The tuner will automatically search
for the broadcasting and cable TV
channels. (The CH No. will
automatically increase when it
appears.)
7
Once EZ SETUP is completed, the
lowest channel number memorized
will be displayed.
The TV set will automatically switch
to searching for EDS signals.
If EDS signals are received, the
channel number and time will be
displayed, and then the screen
shown in step 7 appears.
