
Troubleshooting
67
How to Use the
Online Manual
Print Status
Window
Maintenance
Troubleshooting
Sharing Printer
Windows 95/98/Me/NT4.0 Windows 2000/XP
Printer Driver Settings
Paper is not Fed into the Printer (part 1)
If you encounter paper loading problems, refer to the check list below.
Reference:
Paper Jam
CHECK1
Is there too much paper in the paper tray?
Paper tray can hold up to 100 sheets of 75g/m
2
(20 lbs.)
plain paper. Be sure to keep total thickness of the
loaded paper stack below 10mm. If too much paper is
loaded into the paper tray, paper supply problems will
occur. Remove some of the paper from the paper tray.
CHECK2
Is the top of the following paper fed into the
printer?
If overlapping pieces of paper are supplied to the
printer, paper supply problems will occur. Remove all
the paper from the paper tray, fan, and then load them
again.
CHECK3
Is the paper guide correctly adjusted to fit
the paper?
If the width of the guide is set too narrow, a paper
supply problem will occur. If the width of the guide is
set too wide, printout will be skewed. Ensure that the
guide is adjusted correctly to the paper.
CHECK4
Is the tray at the correct angle?
If using banner paper, envelopes, cards or thick paper,
open the paper tray so that it is nearly horizontal
(position 2). (The tray has two stop positions.)
Paper type
Capacity
Note
Plain paper
100 sheets
With 75
g
/m
2
(20 lbs.) plain paper
80 sheets
With 80
g
/m
2
(21 lbs.) plain paper
Card
20 sheets
Envelope
20 sheets
Transparency
20 sheets
Use SHARP recommended OHP films
T-shirt transfer
1 sheet
Banner
1 sheet
Maximum 5 sheets of banner paper
can be used
Содержание AJ-1100
Страница 1: ......