15
AH-S22AW2
AH-S25AW2
12
11
10
9
8
7
6
5
4
3
2
1
0
1
2
3
4
e, f zone
g zone
h zone
i zone
Dry
Operating frequency code
Fan speed
1-3 Automatic operation
The operating mode and temperature setting are
determined by the room temperature and the external
air temperature.
Cooling
(25˚C)
(Room temperature
- 2
°
C)
Cooling
(26˚C)
Cooling
(27˚C)
Dry
Room
temperature
(˚C)
21
26
31
34
1-4 ON-timer
The ON-timer is set by pressing the ON-timer button.
In order to attain the set temperature at the set time,
the operation starting time is corrected by neuro and
fuzzy computing one hour before the set time.
1-5 OFF-timer
The OFF-timer is set by pressing the OFF-timer
button. Operation is as follows:
Cooling
Set temperature
By fuzzy computing
Set the shift up time
Final(Cooling s 1
°
C)
Dry
Same as above
(Final s 1
°
C)
1°C
Stops
Timer set time
1
hour
Timer operation starts
Room
temperature
*During Cooling / Dry
1-6 Swing louvre
The louvre is moved by a stepping motor to perform
swing and fixing in the set position.
If the "FLOW DIRECTION" button is prossed during
swing, it will stop. If the "FLOW DIRECTION" button is
prossed while it is stopped, it will swing.
1-7 Restart control
Once the compressor stops, this control prevents it
from starting again for 3 minutes. It also prevents
starting for 20 seconds immediately following plugging
into the power outlet.
1-8
One-hour operation
If this button is pressed when operation is
stopped, operation will begin and then stop after 1
hour.
If pressed when it is operating, will stop after one
hour.
1-9
Full power operation
Immediately begins cooling at maximum power
and air flow. Full power stops after 1 hour.
Operates at setting of 18
°
C.
1-10
Power ON start
If a jumper wire is inserted into the place indicated
JP99 on the indoor control board, and the power
plug is inserted. cooling will be automatically
determined by the room temperature sensor on
the main unit, and operation will begin.
12
11
10
9
8
7
6
5
4
3
2
1
0
High
Circulation
Operating frequency code
Fan speed
Med
Low
