16
WARNING
: Turn off and disconnect the unit before working.
1
2
(1)
(2)
(2)
Close the grille firmly, and remove
the front panel by pulling the front
panel at the lower corners towards
you for about 3 cm (1" ). Then lift it
up and pull it towards you. (Fig.3)
Fig.4
Front panel
Fig.
Air filter
Front panel
Fig.2
Fig.1
Grille
(1)
Remove the grille by sliding it to
the left until it stops and then pull it
towards you.(fig.1)
1
2
2
1
INSTALLATION
INSTALLATION
1
2
Unscrew the 2 stopper screws at
the back of the cabinet. (Fig.4)
Unscrew the stopper screw from
the angle at the front of the chassis.
Slide the angle to the left and
remove the angle. (Fig.4) Keep
the screw and angle as they will be
used later in Step 6.
Slide the chassis out from the
cabinet by pulling on the hand
hold located at the bottom center
of the chassis. (Fig.4)
Cabinet
Chassis
Angle
Fig.3
Next lift and unhook the bottom of
the air filter and remove it. (fig.2)
Unscrew the screw fixing the front
panel to the chassis.
Keep the screw as it will be used
later.
http://www.usersmanualguide.com/
