CLOSED
OPEN
Ventilation lever
E-8
Use to adjust the desired room temperature setting.
The air conditioner will automatically maintain the room temperature according to the
THERMOSTAT setting. The higher the numbers, the cooler the room temperature becomes.
Experiments may be needed in order to find out the most suitable setting.
THERMOSTAT KNOB
MODES OF OPERATION
Up/Down air flow
adjustment louvers
Left/Right air flow
adjustment louvers
(Auto Swing)
Use to activate automatic louver movement during LOW COOL, MED COOL and
HIGH COOL.
AUTO SWING SWITCH
Adjust the louvers to change the direction of air flow for uniform and efficient cooling of the
room. Set the AUTO SWING switch ON ( ), and the Left/Right air flow adjustment louvers
will swing continuously to provide better circulation of cool air. The louvers will be stopped at
the position when the switch is turned off. You can also use the switch to adjust the Left/Right
air flow adjustment louvers to the desired position. Never attempt to move the Left/Right air
flow adjustment louvers manually, or manually force the louver movement to stop during
swing operation.
The AUTO SWING switch will not activate the louvers when the SELECTOR KNOB is set to
FAN.
If air in your room is stale, set the VENTILATION lever to the RIGHT (OPEN) position. This
will remove stale air from the room. The VENTILATION lever should normally be kept in the
LEFT (CLOSED) position during cooling operation for maximum cooling effect.
VENTILATION LEVER
Airflow direction can be adjusted by moving the airflow adjustment louvers upward or down-
ward. To avoid condensation on the louvers, please do not adjust these louvers to extremely
downward position during LOW COOL, MED COOL and HIGH COOL operation modes for a
long time.
UP/DOWN AIR FLOW ADJUSTMENT