background image

1

This manual explains the proper use of your new 
heat pump. Please read this manual carefully before 
using the product. This manual should be kept in a 
safe place for handy reference.

IMPORTANT SAFETY 
INSTRUCTIONS 

WARNINGS FOR USE

1

 

This model should be installed with a fixed 
power cord to the meter box.

2

 

Be careful not to expose your body to the outlet 
air for prolonged periods. It may affect your 
physical condition.

3

 

When using the unit for infants, children, 
elderly, bedridden or disabled people make 
sure the room temperature  is suitable for those 
in the room.

4

 

Never insert objects into the unit. Inserting 
objects can result in injury due to the high 
speed rotation of the internal fans.

5

 

If anything abnormal is noticed with the 
air conditioner (eg burning smell), stop the 
operation immediately and turn the circuit 
breaker off.

6

 

This unit should be installed by a licensed heat 
pump contractor in accordance with AS/NZS 
3000 and your electricity suppliers service 
rules.

7

 

There are local council rules regarding 
maximum allowable noise levels emitted by 
heat pump, your licensed heat pump contractor 
will advise you on the correct location of your 
outdoor unit.

8

 

If the supply cord is damaged, it must be 
replaced by the manufacturer or its service 
agent or a similarly qualifi ed person in order 
to avoid a hazard. Use only the manufacture-
specifi ed power cord for replacement.

9

 

Do not pour water directly on the unit. Water 
can cause electrical shock or equipment failure.

CONTENTS

• IMPORTANT SAFETY INSTRUCTIONS ...............1
• PART  NAMES ........................................................2
• USING THE REMOTE CONTROL ........................4
• SETTING AIR PURIFYING FILTER ......................5
• TIPS ON SAVING ENERGY ..................................5
• AUXILIARY  MODE ................................................5
• BASIC  OPERATION ..............................................6
• ADJUSTING THE AIR FLOW DIRECTION ...........7
• COANDA  AIRFLOW  ..............................................8
• SPOT  AIR ..............................................................8
• FULL POWER OPERATION .................................9
• ENERGY SAVING OPERATION ...........................9
• 1.2.3.5h  OFF  TIMER  ...........................................10
• TIMER  OPERATION  ...........................................10
• PLASMACLUSTER  OPERATION  .......................12
• SELF CLEAN OPERATION .................................12
• VACANCY  OPERATION ......................................13
• ADDITIONAL NOTES ON OPERATION .............13
• MAINTENANCE  ..................................................14
• BEFORE CALLING FOR SERVICE ....................15
• SPECIFICATIONS ...............................................15

IMPORTANT SAFETY 
INSTRUCTIONS

WARNINGS FOR INSTALLATION/REMOVAL/
REPAIR

For your safety, ensure that your new heat pump 
is installed by a licensed heat pump contractor in 
accordance with the AUSTRALIAN/NEW ZEALAND 
WIRING RULES.
•  Do not attempt to install/remove/repair the unit by 

yourself. Incorrect installation could cause electric 
shock, water leak, fi re etc.  Consult a licensed 
heat pump contractor for the installation/removal/
repair of the unit.

CAUTIONS FOR USE

1

 

If a gas appliance is used in the same room as 
the heat pump, ventilate the room periodically 
to prevent oxygen depletion.

2

 

For safety, do not touch the unit with wet hands, 
it may cause an electric shock.

3

 

For safety, turn the circuit breaker off when not 
using the unit for an extended period of time.

4

 

For safety, do not place anything on top of the 
outdoor unit or step on it. 

5

 

This unit is designed for residential use.  Do not 
use for other applications such as in a kennel 
or greenhouse to raise animals or grow plants. 

6

 

Do not block the air inlets or outlets of the unit.
It may result in degraded performance or unit 
damage/failure.

7

 

For safety, be sure to turn the unit off at 
the circuit breaker before performing any 
maintenance or cleaning.

8

 

This appliance is not intended for use by young 
children or infirm persons unless they have 
been adequately supervised by a responsible 
person to ensure that they can use the 
appliance safely.

 

Young children should be supervised to ensure 
that they do not play with the appliance.

CAUTIONS FOR LOCATION/INSTALLATION

To ensure that your warranty is not affected, both 
the indoor/outdoor units and supply/interconnecting 
cables must be installed by a licensed heat pump 
contractor.  

 

The unit is designed to operate on 220-240 VAC, 
50Hz.

 

Do not install the unit where fl ammable gas may 
leak. It may cause a fi re.

AY ZP48LZ_eng_cov.indd 1

09.10.30 2:17:03 PM

Содержание AE-Z48LZ





















Отзывы: