background image

The unit must only be installed by authorised air conditioner contractors according to municipal 
or government regulations and  in compliance wi th this manual.

The unit should be installed with a dedicated electrical circuit, and a circuit breaker should 
be fitted in accordance with regulations.

Proper installation position is vital for correct and efficient operation. Avoid the 
following positions:

liquids

electro-magnetic 

Where salt-laden air is a problem (such as close to coastal areas).

Where the air is contaminated with industrial vapours and oils.

Where the air contains sulphured gas such as in hot spring zones.

environments where corrosion or air quality is a problem.

away from any obstruction. Ensure the air can be 

blown through the whole room.

easily connected to the outdoor unit.

where it is 

the wall 

is installed in accord with the installation instructions.

which will 

is installed in accord with the installation instructions, 

and is convenient for maintenance and repair.

between indoor and outdoor units is within 5 metres, and the length

 of the connecting tubing does not exceed 10 metres.

which

pedestrian

1.8m above the floor.

Содержание AE-X09MCJ





































Отзывы: