Sharp 8M-B70AU, Руководство по установке

Страница: 5 / 48

4
ENGLISH
DEUTSCH
ESP
AÑOL
IT
ALIANO
FRANÇAIS
Р
УССКИЙ
POLSKI
IMPORTANT SAFETY INSTRUCTIONS
Caring for the cabinet
• Use a soft cloth (cotton, fl annel, etc.) and gently wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet
or cause cracking.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, fl annel, etc.) soaked in neutral detergent diluted
with water and thoroughly wrung out, and then wipe with a soft dry cloth.
• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint
to peel off.
• Do not apply insecticides or other volatile liquids.
Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time.
Plasticizers inside the plastic may cause the cabinet to deform and cause the paint to peel off.
Caring for the front panel
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Gently wipe the surface of the front panel with a soft cloth (cotton, fl annel, etc.).
To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical
cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front
panel.
• Wiping with a hard cloth or using strong force may scratch the surface of the front
panel.
• Use a soft damp cloth to gently wipe the front panel when it is really dirty.(It may scratch the surface of
the front panel when wiped strongly.)
• If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning
cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs.
Call 1-877-PRO-ADV1 (1-877-776-2381) for ordering, or VISIT http://siica.sharpusa.com/
Do not install the Monitor in a location in which it will be subject to water drops
such as underneath an air conditioning unit or in the vicinity of a humidifi er
• Water drops falling onto the Monitor and water entering inside it may result in fi re, electric shock, or
malfunctions.
• We recommend that you install the Monitor at least
3.3 ft (1m) away from the outlet of an air conditioner.
More than 3.3 ft (1m).
Especially for child safety
– Don’t allow children to climb on or play with the Monitor.
– Don’t place the Monitor on furniture that can easily be used as steps, such as a chest of drawers.
– Remember that children can become excited while watching a program, especially on a “larger
than life” Monitor. Care should be taken to place or install the Monitor where it cannot be pushed,
pulled over, or knocked down.
– Care should be taken to route all cords and cables connected to the Monitor so that they cannot
be pulled or grabbed by curious children.
WARNING
Never place a monitor set in an unstable location. A monitor set may fall, causing serious personal
injury or death.
Many injuries, particularly to children, can be avoided by taking simple precautions such as:
– Using cabinets or stands recommended by the manufacturer of the monitor set.
– Only using furniture that can safely support the monitor set.
– Ensuring the monitor set is not overhanging the edge of the supporting furniture.
– Not placing the monitor set on tall furniture (for example, cupboards or bookcases) without
anchoring both the furniture and the monitor set to a suitable support.
– Not placing the monitor set on cloth or other materials that may be located between the monitor
set and supporting furniture.
– Educating children about the dangers of climbing on furniture to reach the monitor set or its
controls.
If your existing monitor set is being retained and relocated, the same considerations as above should
be applied.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifi cations not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment. To comply with the FCC RF
exposure compliance
requirements, this device and its antenna must not be co-located or operated in conjunction with any other antenna or
transmitter.