Sharp 8M-B70AU, Руководство по установке

Страница: 23 / 48

EN 8
ENGLISH
IT
ALIANO
DEUTSCH
ESP
AÑOL
FRANÇAIS
TÜRKÇE
Р
УССКИЙ
Part Names
Remote Control Unit
13
14
15
16
17
18
12
11
10
9
8
7
6
5
4
3
1
2
1 POWER: Switch the Monitor power on or enter
standby.
2 DISPLAY: Display the information.
3 SLEEP: Set the sleep timer
4 0–9: Input number.
5 • (DOT): Used for MHL and Web browser.
6 OPTION: Display the Link Operation Menu screen.
This button will function only when HDMI CEC Link
Operation is used.
7 VOL+/-: Set the volume.
8 AUDIO: Select the audio mode during multichannel
audio.
9 MUTE: Mute the sound.
10
a
/
b
/
c
/
d
: Select a desired item on the screen.
11 EXIT: Turn off the menu screen.
12 A/B/C/D: Playback control.
13 MANUAL: Display the operation manual.
14 APPS: Display the Application menu.
15 INPUT: Select a Monitor input source.
16 CH: Select the next and previous channel.
17 MENU: Display the menu screen.
18 RETURN: Return to previous menu screen
Check the following before requesting repairs.
Problem Possible Solution
• Power is not turned on. • Check if the AC cord is connected properly and plugged securely into the
outlet.
• When the lamp is not lit, turn on the power using the power button on the
main body.
– The POWER lamp does not go off by turning off the power using the
power button on the main body. The power can be turned on by the
remote control unit.
• An indication Temperature
or Temperature of Monitor
blinks, and power is turned off
automatically.
• The temperature of the Monitor has risen. Get rid of the causes of the
increased temperature (such as direct sunlight or hot air).
• Check if the Monitor is installed in a condition or location where the
temperature rise occurs easily. Do not cover the ventilation opening on the
back of the main body when installing.
• Frequently remove dust from internal equipment or ventilation opening if it
can be removed from the outside. For removing dust inside the equipment,
consult your dealer.
Troubleshooting