Sharp 37D7U - LC - 37" LCD TV страница 61 Скачать руководство пользователя

Страница: 61 / 101

Using external equipment

Selecting an i.LINK device

• In order to control an i.LINK device from the TV, you

must first choose the i.LINK device to be controlled.

• One i.LINK device can be chosen from up to 16

i.LINK connected decks.

• All i.LINK devices connected with i.LINK cables

should automatically appear in the selection screen.

Press

i.LINK

to display the i.LINK control

panel.

Press

to select “Model”, and

press

ENTER

• Selection screen appears.

Press

to select a device, and then press

ENTER

• The control panel for the i.LINK device appears.

Disabling the TV’s operation of an i.LINK device

• By disabling the TV’s operation of an i.LINK device,

the device can be operated from another i.LINK device.

Press

i.LINK

to display the i.LINK control

panel.

Press

to select “Model”, and then

press

ENTER

• Selection screen appears.

NOTE

• Devices that cannot be used with this TV will not appear

in the selection screen.

• Depending on the i.LINK devices connected, the

manufacturer’s name and model name of some devices
may not display correctly.

• In the case where the manufacturer’s and model names

are not correctly displayed, disconnect the i.LINK cable.
Follow the procedure for “Deleting registered i.LINK
devices” and cancel all i.LINK devices you have registered
before reconnecting the i.LINK cable.

• When an item in the selection screen is grayed out, the

item is not recognized by the TV and cannot be selected.
(The item may not be connected properly.)

• The i.LINK device selected above will be automatically

set as a recording device in the TV Guide On Screen
system and may be used to record digital broadcasts.

• When there is no i.LINK device connected, the

message “No i.LINK model is available” appears. In
this case, please connect an i.LINK device. (See
page 58.)

• When there is no i.LINK device selected, the

selection screen appears. In this case, please go to
step 3.

• When there is no i.LINK device connected, “No

i.LINK model is available” appears. Please connect
an i.LINK device. (See page 58.)

• When there is no i.LINK device selected, the

selection screen appears. Please go to step 3.

Press

to select “Cancel Connection” and

then press

ENTER

• Operation of the i.LINK device from the TV is

disabled.

Model

Input

PWR

STOP

00:01:32

Model

Input

PWR

STOP

00:01:32

Type

i.LINK

1/1 [Thu] 1:33AM

Cancel Connection

Manufacturer

Which model do you use?

Model

Deleting registered i.LINK devices

• Registered i.LINK devices can be deleted from a

list.

• If an i.LINK device is connected, it cannot be deleted

from the list.

Press

i.LINK

to display the i.LINK control

panel.

Press

to select “Model”, and then

press

ENTER

Press

to select a device to be deleted,

and then press

ENTER

Model

Input

PWR

STOP

00:01:32

Press

to select “Delete”, and then press

ENTER

• The selected i.LINK device is deleted from the

list.

• Select “Cancel” if you do not want to delete

any device.

Type

i.LINK

1/1 [Thu] 1:33AM

Cancel Connection

Manufacturer

Which model do you use?

Model

Type

i.LINK

1/1 [Thu] 1:33AM

Cancel Connection

Manufacturer

Which model do you use?

Model

Содержание 37D7U - LC - 37" LCD TV






































































































Результаты поиска

Содержание 37D7U - LC - 37" LCD TV

Отзывы:

Похожие инструкции для 37D7U - LC - 37" LCD TV

Бренды по названию

Популярные бренды

Sharp 37D7U - LC - 37" LCD TV, Руководство по эксплуатации

Результаты поиска

Содержание 37D7U - LC - 37" LCD TV

Отзывы:

Похожие инструкции для 37D7U - LC - 37" LCD TV

Бренды по названию

Популярные бренды