420 774 335 397 www.sharks-shop.cz
Stránka 25
Dear customer,
thank you for purchase cordless drill Sharks, type SH 1830 Li-Ion 50 NM with keyless chuck, worklight
and fast charging battery Li-Ion.Your new cordless drill was developed and made by Steen QOS, s.r.o.
and to meet the demands for high standards, operational reliability, easy operation and user
safety.Stable and reliable performance will provide you with proper care. You will enjoy years of safe
operation, if you use the cordless drill properly and only as intended hobby use.
WARNING
Read these instructions on operation and maintenance before starting work. Pay
attention to all WARNINGS and NOTES.
Yours SHARKS product has many features for ease and speed up work. This product
has been devoted attention to the development of operational safety and reliability with
respect to simple maintenance and operation.
WARNINGS AND INSTRUCTIONS
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire or serious injury.
1) Work area safety
●
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
●
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
●
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
●
Do not drill, fasten or break into existing walls or other blind areas where electrical wiring may exist. If
this situation is unavoidable, disconnect all fuses or circuit breakers feeding this work site.
●
Use a detector to localize matallic and power line. If you have doubts contact qualified electrician or
your network operator.
2) Electrical safety
●
Power
tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
●
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
●
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
●
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
●
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
●
If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter
protected supply. Use of a ground fault circuit interrupter reduces the risk of electric shock.