[email protected] www.sharks-shop.cz
Stránka 30
21. Always make sure that the working supports and the transparent cover are securely fastened.
22. As the disc worn, adjust the support surface: 1.5 mm between the support and the disc, 2 mm
between the transparent cover and the disc.
23. When using the grinder, maintain a steady attitude, a balanced body position and keep children out
of the work area.
24. Never leave the grinder unattended. Keep the work area clean.
25. Before using, make sure the grinding wheels are not damaged and cracked. In the event of
damage, replace the disc immediately. Damaged disc may injure the operator.
26. The replacement grinding wheel must have the dimensions recommended by the manufacturer.
27. This grinder is not suitable for grinding soft materials such as lead, magnesia, light alloys.
●
Intended use
The two-wheel grinder is a combined machine for coarse and fine grinding of metals, plastics and
others
materials using the corresponding grinding wheels. The tool is developed especially for machining and
sharpening knives, scissors and cutting edges. The machine may only be used for the purpose of its
intended use! Despite certain uses according to the purpose of destination, certain risk factors can not
be excluded. Depending on the construction and layout of the machine, the following may occur
risks.
Touch the grinding wheel in an uncovered area.
Remove parts from damaged grinding wheels.
Workpiece and workpiece parts removal.
Hearing damage when hearing protection is not used.
The machine may only be used for its intended purpose. Any other over-use use
does not correspond to the intended use. He / she is responsible for the resulting damage or injury of
any kind
user / operator and not the manufacturer. Please keep in mind that our devices were not
of their intended purpose designed for trade, craft or industrial use. We do not assume any liability if
the device is used in trade, craft or industrial businesses and in comparable activities.
WARNING!
Please read these operating instructions and all instructions carefully before using the
device. Only a person who has become familiar with these instructions may use a Bruce.
WARNING!
When using the grinder, always follow the safety instructions to reduce the risk of fire,
electric shock and personal injury.
●
Operating instructions
1. Keep the work area clean. There could be an injury.
2. Consider the place of use:
- Do not expose the grinder to rain
- Do not use it in a wet or humid environment
- Keep the work area well lit
- Do not use a grinder near flammable liquids and gases
3. Protection against electric shock
- Avoid body contact with surfaces that are grounded or grounded (such as pipes, radiators, cookers,
fridges).
4. Keep other people and pets out of the work area
- Do not allow other persons, especially children, to work while working in the work area. Do not touch
the extension cable or touch the work tool.
5. Save unused tools
- If you do not use the grinder, store it in a dry and safe place away from unauthorized persons and
children.
6. Do not attempt to modify and change the bruise. The grinder is designed to be safe.
7. Use the bruise as instructed only for the purpose for which it is designed.
- Do not use the grinder for commercial use
- Do not use the grinder for any purpose for which it is not intended
8. Wear suitable clothing
- Do not wear loose clothing or jewelry that can be caught in moving parts.
