420 774 335 397 www.sharks-shop.cz Stránka 32
Dear customer,
Thank you that you have purchased an angle grinder Sharks, model SH 115. Your new angle grinder
has been developed and manufactured by Steen QOS, Ltd., to meet the demands for high standards,
operational reliability, ease of use and user safety.
With proper care, will provide a stable and reliable performance. If used correctly and only for their
intended purpose hobby use, you will enjoy years of safe operation and reliable service.
NOTICE
Before using your new product SHARKS read these instructions on
operation and maintenance. Take extra attention to all warnings and
cautions.
Your SHARKS product has many features to make your work easier and
faster. In developing this tool, great attention was paid to safety, operation
and reliability with regard to simple maintenance and operation.
GENERAL SAFETY RULES
Warning!
Read and understand all Instructions. Failure to follow all instructions listed below, may result in
electric shock, fire and/or serious personal injury.
!!!SAVE THESE INSTRUCTIONS!!!
Work Area
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignite the dust of fumes.
3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can
cause you to loose control. Anyone entering the work area must use protective equipment.
Fragments of workpiece or of a broken accessory may fly away and cause injury in the
immediate work area.
Electrical Safety
1. Double insulated tools are equipped with a polarized plug (one blade is wider than the
other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a
polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for
the three wire grounded power cord and grounded power supply system.
2. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is grounded.
3. Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock. If it is unavoidable in a damp environment, it is necessary to
use a protected supply current device (RCD).
4. Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an
outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged
cords immediately. Damaged cords increase the risk of electric shock.
5. When operating a power tool outside, use an outdoor extension cord marked “W-A” or
“W”. These cords are rated for outdoor use and reduce the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A
moment of inattention while operating power tools may result in serious personal injury.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your
hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be
caught in moving parts.
3. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with
your finger on the switch or plugging in tools that have the switch on invites accidents.