www.sharks-shop.cz Stránka
32
MAINTENANCE TABLE
The scooter should be checked from time to time. You will find the maintenance plan in the following
table (repairs may only be carried out by an authorized service center using original spare parts)
If you encounter a problem that you cannot solve yourself during maintenance, do not use the product
and contact your dealer. Never attempt to repair it yourself, as this may invalidate the warranty.
Item
Check Content
Initial
1000km/1
month
3000km/3month
Each
3000km/3
months
Front Brake
Whether brakes and oil pipes
leak oil,correct if necessary.
F&R brake
handle
Brake function.replace if
necessary.
Rear arm
pivot*
Check the tightness,replace if
necessary.
Wheel*
Balance,damage degree,out of
roundness.replace if necessary.
Wheel
Bearing*
Check the tightness,replace
if necessary
F&R Shock
absorption*
Whether leaking oil,correct
if necessary
Bracket
Using function,replace
if necessary
Component
Tightness*
Whether tightening
each component. correct if
necessary.
Battery*
Battery capacity. replace if
necessary.
motor*
Whether abnormal
noise;lubricated bearing
controller*
Complete appearance and
functions
CLEANING AND STORAGE
- Never use high pressure washers or any water pressure to clean the scooter. Wet electrical parts
and wiring can affect the performance and operation of the scooter.
- Never use any grease on the drum brake and tires.
- use grease to clean the metal parts of the wheel.
- To clean the surface of the plastic gratings, use a standard clean cloth and wipe.
●
Short-term storage (several days)
- store the scooter in a cool and dry place, cover it if necessary. Keep it in a safe place out of the reach
of unauthorized persons and children.
●
Long-term storage (more than a week)
- Clean the scooter
- Store the scooter in a well-ventilated place away from moisture. High humidity leads to corrosion
damage.
- check the tire pressure and lift the scooter off the ground so that none of the tires touch the ground. if
this is not possible, turn the wheels regularly so that they are not always at the same point.
- if you are not going to use the scooter for a long time, the switch should be in the "OFF" position