www.sharks-shop.cz Stránka
31
CHARGING
When charging, keep the charger and battery horizontal to prevent them from falling. Do not cover the
charger with anything during charging to prevent overheating.
●
Charging procedure
- check that the output voltage of the charger corresponds to the voltage of the socket.
- you can charge the battery directly in the scooter, there is no need to remove it.
- Connect the charger output port and the battery charging port first, and then connect the charger
input port and socket. The charger indicator light will be red.
- during charging, the indicator light is red, when charging is completed, the indicator light is green.
Charging time is approximately 4-6 hours (charging time depends on the remaining battery power).
Never leave the battery connected to a charger for more than 12 hours.
- if the charger light is green, the charger will automatically switch to a constant charge state and will
continue charging for 2-3 hours.
- After charging, first disconnect the AC port from the wall outlet and then disconnect the port from the
battery.
- Do not leave the charger plugged in unless you are charging the battery. Always unplug it after
charging.
MOTOR MAINTENANCE
- Clean the motor cover dust regularly to keep the motor cool and extend the motor life .
- Regularly check whether the screws and nuts on both ends of the motor are loose. If they are loose,
please tighten them in time to avoid damage to the motor when riding.
- Regularly go to the maintenance station to check the insulation between the motor wire and motor
cover
- Regularly check whether the controller connection plug is loose, and regularly check whether the
scooter fuse box is loose. If there is any problem, deal with it in time.
NOTE: Pls start the scooter slowly ,to reduce the damage of large current to motor/controller/battery
.extend their life .
negative
electrode
positive
electrode