SharkRF openSPOT, Руководство пользователя

Страница: 92 / 138

DMR transceiver
91
Server and room change using a D-STAR® radio (openSPOT4 Pro
only)
DTMF method
Enter DTMF code * followed by the special ID described below.
URCALL/your call method
Set the URCALL to the FCS server and room number. Example: starting a call to
destination callsign (URCALL)
FCS00199
switches to FCS001 room 99.
The URCALL/your call method lets you change to the following server types:
REF/XRX/Gateway: set the URCALL to for example
REF001 C
. Switching to
REF/XRF servers or gateways this way changes the openSPOT4's active
connector to the
REF/XRF connector .
DCS/XLX: set the URCALL to for example
DCS001 A
. Switching to DCS/XLX
servers this way changes the openSPOT4's active connector to the DCS/XLX
connector .
BrandMeister: set the URCALL to
BM
followed by the BrandMeister server
ID. Example: starting a call to destination callsign (URCALL)
BM2162
switches to BrandMeister server 2162 (Hungary). Switching to BrandMeister
servers this way changes the openSPOT4's active connector to the
Homebrew/MMDVM connector .
FCS: set the URCALL to the FCS server and room number. Example:
starting a call to destination callsign (URCALL)
FCS00199
switches to
FCS001 room 99. Switching to FCS servers this way changes the
openSPOT4's active connector to the
FCS connector .
YSFReflector: set the URCALL to
YS
followed by the YSFReflector server
ID. Example: starting a call to destination callsign (URCALL)
YS89804
switches to YSFReflector 89804 (AmericaLink). Switching to YSFReflector
servers this way changes the openSPOT4's active connector to the
YSFReflector connector .
NXDNReflector: set the URCALL to
NX
followed by the NXDNReflector
server ID. Example: starting a call to destination callsign (URCALL)
NX28299
switches to NXDNReflector 28299 (America-Ragchew). Switching to
NXDNReflector servers this way changes the openSPOT4's active connector
to the
NXDNReflector connector .
You can switch the cross mode DGID sent to the network using a D-STAR®
transceiver by entering DTMF code
# followed by the desired DGID. For example,
if you want to set the cross mode DGID to 25, enter DTMF #25. If you only
enter
# then the cross mode DGID will be reset to 0.
Special IDs for server and room change
The format of the ID to call with your DMR, NXDN® or P25 radio, or the ID to
enter using DTMF codes on your D-STAR® radio can be the following:
room number or
server number + room number